Manual Gazco Chesterfield - Conventional Flue (page 14 of 44) (English)

813480

Zoom out

Zoom in

1/44

SITE REQUIREMENTS

SAFETY PRECAUTIONS

For your own and other’s safety, you must install this appliance

according to local and national codes of practice. Failure to install

the appliance correctly could lead to prosecution. Read these

instructions before installing and using this appliance.

These instructions must be left intact with the user.

Do not attempt to burn rubbish on this appliance.

Keep all plastic bags away from young children.

Do not place any object on or near to the appliance and allow

adequate clearance above the appliance.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN USE,

WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT THE

APPLIANCE.

IMPORTANT: REFER TO DATA BADGE AND

TECHNICAL SPECIFICATION AT THE FRONT OF

THE MANUAL TO ENSURE THE APPLIANCE IS

CORRECTLY ADJUSTED FOR THE GAS TYPE AND

CATEGORY APPLICABLE IN THE COUNTRY OF

USE.

FOR DETAILS OF CHANGING BETWEEN

GAS TYPES REFER TO SERVICING SECTION

REPLACING PARTS.

FLUE & CHIMNEY REQUIREMENTS

WHEN INSTALLING A FLUE SYSTEM PLEASE REFER TO THE

MANUFACTURERS INSTRUCTIONS.

The European chimney standards now describe chimneys and

flues by their temperature, pressure and resistance to corrosion,

condensation and fire. To identify the correct flue system, the

minimum flue specification is shown in the Technical Specification.

Existing chimneys are not covered by this system.

The chimney or flue system must comply with the rules in force,

and must be a minimum of 127mm (5") in diameter.

A 127mm liner must be used if fitting the appliance into an existing

brick built chimney.

Larger lined flues can work, but in some instances could cause

cold start flue problems resulting in nuisance shutdown. Lined flues

above 175mm are not recommended.

Suitable systems are:

a) Flexible liner which must be continuous from the appliance

spigot to the roof terminal.

b) Gazco Linerless kit.

UNDER NO CIRCUMSTANCES MUST THE LINERLESS KIT BE

USED WITH ANY INSTALLATION OTHER THAN AN EXISTING

MASONRY CHIMNEY WHICH HAS A MINIMUM DIAMETER OF

178mm. THE CHIMNEY MUST BE SOUND AND CLEAN. IF

PREVIOUSLY USED FOR SOLID FUEL, IT MUST BE SWEPT

PRIOR TO PROCEEDING WITH THE INSTALLATION.

NOTE: If the Linerless kit is to be used, due care should be taken

to prevent condensation forming in the chimney. Do not fit the

Linerless Kit if the chimney is taller than 10 metres (external wall)

or 12 metres (internal wall).

The minimum flue height for the appliance must be 3 metres. Any

horizontal flue run from the rear outlet must not exceed 100mm

from the back of the appliance.

The chimney or flue must be free from any obstruction. Any

damper plates must be removed or secured in the fully open

position, and no restrictor plates fitted.

The chimney must be swept prior to the installation, but it need not

be swept if it can be seen the chimney is clean and unobstructed

throughout its entire length.

Steel Register

Plate with Clamp

that holds the Flex

Adapter

Flex Pipe Adapter

connects to stove

ue pipe

Stove Flue Pipe

running from the

stove to the Flex

Pipe Adapter

Stove

FLUE OPTIONS

A range of Vitreous Enamel Gloss Black flue pipe is available

to compliment the appliances. Please contact your Gazco

retailer for further information.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Chesterfield - Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 8.08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Chesterfield - Conventional Flue Manual

Product: