813478
30
Zoom out
Zoom in
Previous page
1/52
Next page
30
Note: The Power Switch does not need to be turned
off each time the appliance is not in use.
However, if the appliance is left unattended for long
periods of time (e.g. vacation), it is recommended to
place the Power Switch into the off position.
TURNING THE APPLIANCE ON:
Press and hold the Power Button for 1 second and release.
The burner will light approximately 2 to 3 seconds later.
Use + and - buttons to adjust the flame height between Minimum
and Maximum.
TURNING THE APPLIANCE OFF
Press the power button to turn the appliance off.
IMPORTANT: YELLOW FLAMES TYPICALLY
APPEAR WHEN THE APPLIANCE HAS REACHED
NORMAL OPERATING TEMPERATURE. THIS CAN
TAKE UP TO 30 MINUTES.
WARNING: IF THE APPLIANCE FAILS TO LIGHT OR
BECOMES EXTINGUISHED IN USE, WAIT 3
MINUTES BEFORE ATTEMPTING TO RELIGHT.
THE APPLIANCE WILL TAKE 3 AUTOMATIC
ATTEMPTS TO RESTART.
DO NOT INTERRUPT THE VALVE DURING THIS
PROCESS.
REMOTE CONTROL
To operate the appliance the Power Switch on the Control Box
must be switched ON ( l ) .
To activate the Remote Control it will be necessary
to cradle the handset to unlock. The green light
will illuminate to show the handset is ready to use.
IMPORTANT: Continue to cradle the handset
throughout an operation to keep it unlocked.
If the green light goes off during an operation it
will be necessary to reposition the handset so the
light comes back on and restart the operation.
Battery status
Light Sensor
(for display light)
Day of
the week
Appliance
Status
Time (12 hour or
24 hour display)
Room
Temperature
Mode:
Man (Manual)
Zzz (Timer)
Thermostat or
Timed
In Range of appliance
(missing if not in or
appliance turned off)
Handset unlocked
(when illuminated)
Change Handset
Settings
Change Mode
Settings
Decrease Button Increase Button
Power Button
HANDSET INITIAL SET UP
Following initial set up or new pairing it will be necessary to set the
time and date.
Note: Pressing SET button will advance the display
to the next screen and pressing MODE button will
return it to the previous setting.
SETTING THE TIME
Once the handset is paired the screen will show that the time is not
yet set. The handset will then automatically progress to the next
setup screen.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Chesterfield - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Chesterfield - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info