813478
12
Zoom out
Zoom in
Previous page
1/52
Next page
12
13
IT MAY NOT BE NECESSARY TO USE ALL THE
EMBAGLOW IN THIS PACK.
SPARINGLY SPREAD AN AMOUNT OF THE FIBRES
PROVIDED ON THE SECTIONS HIGHLIGHTED IN THE
INSTRUCTIONS.
Take care not to use more than specified in the
instructions.
14
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
FLAME FAILURE DEVICE
This is a safety feature incorporated on this appliance which
automatically switches off the gas supply if the pilot goes out and
fails to heat the thermocouple.
IF THIS OCCURS DO NOT ATTEMPT TO RELIGHT THE
APPLIANCE FOR 3 MINUTES.
RUNNING IN
During initial use of a new Gazco appliance a strong odour will be
encountered as various surface coatings become hot for the rst
time. Although these odours are harmless it is recommended that
the appliance is operated on maximum for 4 to 8 hours in order to
fully burn off these coatings. After this period the odours should
then disappear.
If the odours persists, please contact your installer for advice.
During the rst few hours of burning there may be discolouration of
the ames. This will also disappear after a short period of use.
SERVICING AND SUPPORT
Servicing and Support
To keep your appliance looking and performing at its best, it
must be serviced annually. This service must be undertaken
by a suitably qualified individual and your retailer can organise
this for you. Alternatively, Gazco offer a manufacturers premium
service with our friendly team of qualified engineers which can
be booked at www.gazco.com/support
In all correspondence always quote the Model number and the
Serial number which may be found on the Commissioning Checklist
(Page 3).
VENTILATION
This appliance requires no additional ventilation.
INSTALLATION DETAILS
Your installer should have completed the commissioning sheet at
the front of this book. This records the essential installation details
of the appliance. In all correspondence always quote the Model
number and Serial number.
HOT SURFACES
Parts of this appliance become hot during normal use.
Regard all parts of the appliance as a ‘working surface’, except for
the access to the controls.
Provide a suitable re guard to protect young children and the
inrm.
APPLIANCE WILL NOT LIGHT
If you cannot light the appliance:
Check and change the batteries in the remote handset.
Consult your Gazco retailer or installer if the appliance still does not
light.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Chesterfield - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Chesterfield - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info