813478

Gazco Chesterfield - Balanced Flue Manual

8
Zoom out
Zoom in
Previous page
1/52
Next page
8
ADVANCED MENU SETTINGS
It is possible to change additional preset settings of the control
features.
Access the Advanced Menu Settings.
Press and release the SET button to enter the Advanced Settings
Menu.
Advanced Settings are:
Back Light (L)
- A = Automatic (default setting).
The backlight comes on in the dark.
- O = Light never comes on.
- 1 = Light comes on when the handset is unlocked.
Display Contrast (C)
- 8 Levels from 0 - 7 (Default level 4).
P = Pairing with devices other than the Control Box.
This feature is not available on this appliance.
IMPORTANT: THE FURTHER FUNCTIONS ON THIS
HANDSET ARE FOR FACTORY SETTING ONLY
AND ARE NOT TO BE USED.
PLACE THE HANDSET ON A FLAT SURFACE AND
WAIT UNTIL THE HOME SCREEN IS DISPLAYED
AND THE UNLOCK LIGHT TURNS OFF.
PAGING THE HANDSET
If the handset is lost it can be located by pressing the + only on the
Control Box for 5 seconds.
The handset will flash and make a noise for 60 seconds to indicate
where it is.
Pick up the Handset and cradle it to unlock. The flashing and noise
will stop.
If the handset is not discovered in 60 seconds the process will
need to be repeated.
CHANGING THE DEFAULT TIMER MODE
It is possible to change the default time period for the Timer mode.
The default time period for Timer mode is factory set to 1
hour.
To change the default time:
Holding the remote to keep the green light on and the handset
unlocked:
Press and hold the SET button until a beep is heard to indicate the
command has been received.
Release the SET button. PROG will be displayed at the top left of
the display.
Repeatedly press the MODE button until the Zzz symbol flashes at
the top of the display.
Press and release the SET button.
Press the + or - buttons to alter the default time period.
The timer can be set between 1 minute and 24 hours.
After adjusting the time press SET again to confirm.
Note: This does not activate the Timer mode, see Installation
Section, Manual Operation or Thermostatic Mode.
REPLACING THE APPLIANCE
BATTERIES
Replace batteries at least every 12 months during the annual
service of the fire.
It is essential to use high quality batteries (Duracell
or equivalent) when replacing batteries.
The icon at the bottom shows the battery condition of both the
batteries in the handset and in the Control Box alternately.
Battery status
RC = Remote Control Handset
FC = Fire Control (Control Box)
Note: Change the batteries in the handset before
they are flat, to avoid having to reprogram the time
of day in again. N.B. Pairing is not lost, even if the
batteries are removed or flat.
The appliance Control Box requires 3 AA size alkaline batteries.
The handset requires 2 AA size alkaline batteries.
Slide the Power Switch on the Control Box to the OFF
( o ) position before attempting to change the batteries.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Chesterfield - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Chesterfield - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info