813361
11
Zoom out
Zoom in
Previous page
1/23
Next page
11
3.5 Remove the assembly and drill the two holes using a No. 12
masonry bit. Push the rawl plugs into the holes, and place
the engine assembly in position, secure to the floor using
the screws provided. See Diagram 3.
AR0359
158mm
3
3.6 Having run the gas supply to the stove, PURGE THE
SUPPLY PIPE, this is essential to expel any debris that may
block the gas controls. connect the gas supply to the
8mm-compression elbow at the RH rear corner of the stove,
ensuring that the pipe position does not interfere with the
location of the outer steel casing. See Diagram 4.
AR0934
4
3.7 Open the second carton, and carefully remove the ceramic
outer casing components. Gently position the LH side so
that the bolt heads on the engine subframe locate in the
keyhole slots on the back of the panel, and gently slide into
place so that the ceramic comes to rest on the floor. Repeat
the procedure for the RH side, see Diagram 5.
AR0488
5
3.8 Remove the cast iron door using the tool provided, and
carefully place to one side. Gently position the front
ceramic panel so that the side panels locate inside the
returns on the front panel, engage the bolt heads in the
brackets on the back of the panel and gently slide into place
so that the ceramic comes to rest on the floor, ensure that
the opening in the panel sits centrally around the fire box
opening, see Diagram 6.
AR0490
6
INSTALLATION INSTRUCTIONS
INSTALLATION
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Ceramica Manhattan 8578-P8578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Ceramica Manhattan 8578-P8578 in the language / languages: English as an attachment in your email.

The manual is 2.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info