813362

Gazco Ceramica Manhattan 8615LUC P8615LUC Manual

16
Zoom out
Zoom in
Previous page
1/24
Next page
16
SERVICING INSTRUCTIONS
SERVICING / FAULT FINDING CHARTS
NO SPARK
IGNITION FUNCTIONAL CHECK 2
Ensure there is no debris around the pilot assembly, (e.g. coal, soot
etc.) which could short the spark, clear the area.
From Ignition Fault Finding
Chart Part 1.
Consult the Users Instructions,
retry.
Operate the valve to light the
pilot, does the valve ‘click’?
Is the valve being operated
properly?
Is the pilot burner horizontal?
See diagram 1 on page 15. Reset the electrode gap, retry.
Replace the pilot unit. Replace the electrode lead
and retry.
Remove the electrode lead
from electrode with insulated
pliers. Hold the tip 4mm from
the pilot pipework, is there a
spark when the valve ‘clicks’?
Check the defective or
damaged control knob spindle
or cam operation. Check for
correct location of piezo
components. Correct and
retry.
Is the electrode wire detached
from the piezo in the valve?
Replace the combined lead,
retry.
Remove the electrode lead
from the piezo. Operate the
valve. Does a spark jump from
the piezo to the valve body?
Has ignition lead become
detached or is connection
poor?
Correct and retry.
NO
NO
YES
NO
NO
NO NO
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
PILOT WILL NOT STAY LIT OR FIRE GOES OUT IN USE
SYSTEM OK
FLAME FAILURE FUNCTIONAL CHECK 3
Ensure there is no debris around the pilot assembly, (e.g. coal, soot
etc.) which could short the spark, clear the area.
Light the pilot and keep the control knob pushed in at least 10
seconds before letting go.
With the pilot
running, is the gas
pressure stated on
the databadge?
With the fire
running on full, is
the gas at the
pressure stated on
the databadge?
Run for no more
than 60 seconds,
turn off, time
interval until mag
unit shuts with a
click. Is this greater
than 7 seconds?
Tighten the
connection and
retry.
Run for 60 seconds,
turn off, time
interval until mag
unit shuts with a
click. Is this greater
than 7 seconds?
Will the pilot stay
lit?
Is thermocouple
connection good in
back of valve?
Replace the
thermocouple.
Will pilot stay alight?
Change the pilot
unit.
Change mag unit.
Is the pilot flame of
the correct length?
See diagram 1 on
page 19.
Problem is with the
pipework or fittings
which lead to the
fire. Correct and
retry.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Ceramica Manhattan 8615LUC P8615LUC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Ceramica Manhattan 8615LUC P8615LUC in the language / languages: English as an attachment in your email.

The manual is 4.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info