813477
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
2.3 Ensure that the left-hand control knob is pointing to off ( ).
2.4 Ensure that the right-hand control knob is pointing to off ( ).
AR0914
2
2.5 Press in the right-hand control knob and, keeping he knob
depressed, turn it anti-clockwise until a click is heard and
the knob is pointing to pilot ( ). The pilot should now light.
If the pilot does not light, release the knob and repeat the
procedure until it does.
2.6 Keep the control knob pressed in for 10 seconds and then
release it, the pilot should stay alight. If the pilot goes out,
repeat the procedures until it remains lit.
2.7 If the pilot does not light after repeated attempts, contact
the retailer or installer from whom the appliance was
purchased.
2.8 Turn the right-hand control to point to main burner ( ).
The appliance can now be controlled using the left-hand
control knob.
2.9 Turn the left-hand control knob to point to low flame ( ),
the main burner lights on low. The burner can now be
controlled between low and high settings. Turn the control
knob anticlockwise to increase the flame height and
clockwise to decrease the flame height.
THE YELLOW FLAMES WILL APPEAR WHEN THE
APPLIANCE HAS REACHED SUFFICIENT HEAT -
TYPICALLY 10 TO 20 MINUTES.
IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN
USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO
RE-LIGHT THE APPLIANCE.
3. TURNING THE APPLIANCE OFF
3.1 To turn the appliance off, locate the control valve, turn the
left-hand control knob until it points to off ( ). The main
burner goes out leaving the pilot burning.
3.2
To turn the pilot off, locate the control valve, turn the right-
hand control knob until it points to off ( ), the pilot goes out.
4. UPGRADING YOUR APPLIANCE
The appliance is fitted with a control valve that can be
upgraded to support a battery powered remote control.
Two types of remote control can be obtained through your
local Gazco stockist:
4.1 The Standard Remote Control (Gazco Part No. 8455)
controls the gas appliance after the pilot is lit so you can
regulate the main burner through its range of settings and
turn the burner off leaving just the pilot lit.
4.2 The Thermostatic and Timer Remote Control (Gazco Part
No. 8456) controls the appliance after the pilot is lit using
three modes:
Manual Mode used to turn the burner on and off and
regulate it through its range of settings.
Auto Mode used to turn the burner on and off and
regulate the heat to a pre-set temperature.
Timer Mode used to turn the burner on and off at two
pre-set times and regulate the heat to a pre-set
temperature during those periods.
5. ADVICE ON HANDLING AND DISPOSAL
OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste
and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
6. CLEANING THE APPLIANCE
Allow the appliance to cool thoroughly to avoid risk of
burns.
NOTE: THE CAST IRON DOOR IS HEAVY, TAKE
EXTREME CARE WHEN HANDLING.
USER INSTRUCTIONS
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Ashdon - Coal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Ashdon - Coal in the language / languages: English as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info