714660
63
Zoom out
Zoom in
Previous page
1/72
Next page
63
When operating the appliance via an external power supply, disconnect the appli-
ance from the power outlet. If you run the scale on batteries press the SCALE button
to switch off the scale (LCD display gets dark). See: ‘Battery Operation’.
Then insert the threaded rod in the centre of the black side of the scale platform into
the scale installing port. Turn the scale platform clockwise until you feel a slight resi-
stance. DO NOT tighten the scale platform to avoid damage to the scale sensor.
Place the appliance on a stable and level surface, where it will not tilt or wobble.
Ensure that there are no objects on the scale platform.
Turn the stabilization levers at both sides of the appliance to the lower IDLE/SCALE
position.
If you wish to operate the scale using an external power supply, then con-
nect the power cord to the appropriate power socket at the back of the appli-
ance (230 V AC or 12 V DC; see: ‘Using an External Power Supply’). The-
reafter connect the power cord to the power outlet of the power supply.
With batteries in the battery compartment, simply press the SCALE button to switch
on the scale. The LCD display will be illuminated with some symbols and characters,
while the scale runs an initialisation process. Wait until zero is displayed in the cur-
rently selected unit. The scale is ready for operation now.
WEIGHING YOUR FOOD
TIP:
The scale can display the weight in several units. Without batteries in the battery
compartment, after disconnecting the appliance from the power supply the unit
grams (“g”) will always be selected. However, as long as the appliance is live, the
recently selected unit will be kept in memory (see: ‘Units of Weight’).
To ensure an accurate result, wait at least 30 seconds after switching on the scale,
before you place any items on the scale platform.
CAUTION: By holding the MODE button pressed, you enter calibration mode and,
without any load on the scale platform, the LCD display shows “2000.0 g”. In this
case, immediately press the SCALE button to switch off the scale. The scale is facto-
ry calibrated. Usually, there is no need to repeat calibration, but with an imperfect
or erroneous calibration, all following readings will be incorrect (see: ‘Calibration’).
If the desired unit is not indicated on the rightmost column of the LCD display, shortly
press the MODE button repeatedly until the desired unit is shown.
CAUTION: Do not place any objects with more than 2 kg onto the scale platform.
Always place the objects to be weighed on the centre of the scale platform to avoid
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 46012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 46012 in the language / languages: English, German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info