512580
38
Zoom out
Zoom in
Previous page
1/48
Next page
38
OVERHEAT PROTECTION
A thermal cut-out (overheat protection) will switch OFF the appliance automatically,
when overheated. In this case, the appliance will be out of work. This could happen,
if you started too much sealing processes in a too short time. Additionally, room tem-
perature higher than 35 °C or overvoltage could set the thermal cut-out active. In this
case, just unplug the appliance. Let the appliance cool down for at least 20 minutes.
Thereafter, you can start working again.
OPERATION
WARNING—Risk of suffocation! Do not let young children play with
the foils or bags or packaging, or the appliance, or any part of it.
When vacuum packing liquids (beverage, sauces, soups) freeze the liquid before
vacuum sealing. Always ensure that the appliance will not suck any liquid into the
vacuum pump. If any liquid is sucked in, IMMEDIATELY press the STOP button and
unplug the appliance, to avoid risk of electric shock and damage to the appliance.
Thereafter clean and dry the appliance thoroughly.
Do not spill or drip any liquids on the appliance. Do not operate the appliance on
wet or damp surfaces. When liquids are spilled on or under the appliance, immedia-
tely unplug the appliance and dry the appliance to avoid risk of electric shock or fire.
Only use the designated foils and containers for vacuum packing. Unsuited foils will
melt on the sealing band and/or carbonize. Unsuited or damaged containers could
burst with splinters hurled around. Additionally, food will be inedible, when contami-
nated with splinters. Always check the containers for perfect condition, before each
use.
GETTING THE APPLIANCE READY FOR USE
WARNING: Do not let young children play with the appliance or any
part of it or the foils/bags.
1. Unpack the appliance and remove all promotional materials and packaging. DO
NOT remove any warning labels or the model label. Ensure that there are no
foreign objects (e.g. packaging) in the interior of the appliance. Pay attention that
the foam rubber seals (in the base and lid of the appliance) as well as the sealing
band and sealing gasket are level and clean. Otherwise, the appliance cannot
generate a vacuum and/or close the bags air-tight.
2. The power cord is placed in a chamber in the base plate of the appliance.
Unwind the power cord and insert it in the cable guide at the rear of the base
plate.
3. Place the appliance on a convenient and dry surface. (See: ›Important Safegu-
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 46007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 46007 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 46007

Gastroback 46007 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info