712138

Gastroback 42709 Design Espresso Pro Manual

73
Zoom out
Zoom in
Previous page
1/84
Next page
73
Problem Possible Reason The Solution
The coffee is not hot
enough.
The cups or the portafil-
ter were not pre-heated.
Rinse the cups using the hot water function and place
them on the warming tray. Rinse the portafilter, before
wiping the portafilter dry and filling in coffee powder.
The appliance did not
reach the operating tem-
perature, before brewing
started.
Always wait until the POWER button is illuminated con-
tinuously, before starting an extraction via the brew
function.
The group head has
not been purged before
extraction.
Purge the group head by activating the brewing func-
tion without the portafilter installed. This way, the parts
of the group head will be pre-heated and the coffee
temperature will be increased.
The milk is not hot
enough for making cap-
puccino or latté macchi-
ato etc.
The milk is tempered suf-
ficiently, when the bot-
tom of the milk jug gets
too hot for touching it.
Increase the time duration for texturing milk, thus incre-
asing the temperature, by pressing more steam into
the milk.
The milk has an
unpleasant taste/odour
after texturing.
The used milk is not real-
ly fresh.
Only use fresh, cold milk for texturing.
Residues of milk are on
the hot water / steam
wand, probably within
the stainless steel tube.
Always clean the hot water / steam wand in time
(see: ‘Cleaning the Hot Water / Steam Wand’). After
each usage, wipe off residues of milk from the hot
water / steam wand and purge the hot water / steam
wand by shortly operating the steam function. This
way, you reduce the build-up of dried-on milk.
The water within the
water tank is stale.
Each day before use, empty and refill the water tank
with fresh, cold tap water. Regularly clean the water
tank (see: ‘Cleaning the Water Tank’).
The water system must
be purged.
This can happen after an elongates period of storage
and when using the appliance only rarely. Clean the
appliance (see: ‘Care and Cleaning’), especially purging
the water system thoroughly (see: ‘Purging the Water
System’).
No or not enough crema. The coffee beans are
stale.
Use freshly roasted coffee beans with a 'Roasted On'
date and consume 3 weeks after that date, at the
latest (see: ‘Selection and Storage of Coffee’).
The coffee powder has
been tamped too tightly.
Reduce the pressure, applied for tamping the coffee
powder in the filter basket.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42709 Design Espresso Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42709 Design Espresso Pro in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info