712138

Gastroback 42709 Design Espresso Pro Manual

61
Zoom out
Zoom in
Previous page
1/84
Next page
61
Note:
During operation and in standby mode, the POWER button may flash occasional-
ly, indicating that the espresso machine keeps the correct temperature of the group
head.
Perform the following steps, when the espresso machine is in standby mode, with the
POWER button illuminated continuously.
1. Ensure that the water tank is filled to the MAX filling level and the drip tray is
completely empty and installed correctly.
2. Place a sufficiently large vessel (e.g. a large mug or bowl) on the drip tray, below
the group head. Turn the hot water / steam wand to ensure that it is pointing into
the vessel, but not placed directly under the group head.
WARNING: During the purging process, large amounts of hot steam and hot
water will escape from group head and hot water / steam wand. Additionally, hot
water may splash. Keep a sufficient distance to the appliance. Ensure to empty the
used vessel in time!
While doing so, keep in mind that the contents and vessel will
be hot. Keep an eye on the filling level in the water tank and refill the water tank in
time.
3. Turn the selection dial CLOCKWISE to run hot water through the group head.
After approx. 10 -15 seconds, turn the selection dial back to the vertical position
(OFF).
IMPORTANT: During the purging process, observe the filling level in the water tank.
Ensure that the filling level will not drop below the MIN marking. Before removing the
drip tray, always wait approx. 30 seconds after the last operation of the appliance,
then press the POWER button to switch off the appliance. Otherwise, hot water could
escape due to the backflush system of the machine. With the drip tray emptied and
re-installed, press the POWER button again.
4. Wait, until the POWER button is illuminated continuously again. Ensure that the
hot water / steam wand is directed to the drip tray or into the vessel used. Then
turn the selection dial COUNTER-CLOCKWISE to run hot water through the hot
water / steam wand. After 10 -15 seconds, turn the selection dial back to the
vertical position (OFF) to stop the water flow. Wait, until the POWER button is
illuminated continuously again. Ensure that there is still enough water in the water
tank.
5. Press the STEAM button to select the steam function. Then turn the selection dial
COUNTER-CLOCKWISE to give off steam via the hot water / steam wand. After
approx. 10 seconds, turn the selection dial back to the vertical OFF position to
stop the steam function. Automatically, the STEAM button will go out and the hot
water function will be selected again.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42709 Design Espresso Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42709 Design Espresso Pro in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info