714689
108
Zoom out
Zoom in
Previous page
1/148
Next page
EN
108
EMPTYING THE DRIP TRAY
If required, empty the drip tray, before starting a extraction cycle.
IMPORTANT - When the appliance has been in operation just before, the water
in the drip tray may be hot. At least, when the red filling indicator comes up at
the cup tray, empty the drip tray to avoid overflow. Additionally, the content of the
drip tray may easily be spilled, when the drip tray is overfilled.
1. Grasp the drip tray at the front and pull it out carefully.
2. Remove the cup tray and the red filling indicator and empty the drip tray. If
required, rinse the drip tray with clear tap water. Then wipe dry the exterior of
the drip tray.
3. Replace the drip tray and ensure that the drip tray does not protrude the base
of the appliance. If required, slightly push the drip tray in.
4. Replace the filling indicator onto the post at the left side of the drip tray. The fil-
ling indicator must sliding completely down without resistance.
5. Replace the cup tray. The three wide holes in the cup tray must face to the left
rear side of the machine. Ensure that the cup tray is lying firmly on the drip tray.
FILLING THE BEAN HOPPER
If you wish to operate the grinder, ensure that a sufficient amount of fresh, whole
coffee beans is in the bean hopper. In total, 220g coffee beans may be filled into
the bean hopper.
Remove the bean hopper lid for filling. However, do not overfill the bean hopper.
bean The hopper lid must be closed correctly after filling. Otherwise, the flavour of
your coffee beans diminishes rapidly and your espresso gets weak and stale.
Preparing the Appliance for Operation
1. Ensure that the water tank is filled with a sufficient amount of cold water (250-
2500ml; filling level between MIN and MAX) and the water tank inserted cor-
rectly. Ensure that the drip tray is empty and correctly in place (see: ‘Filling the
Water Tank’ and ‘Emptying the Drip Tray’).
2. If you wish to operate the grinder, ensure that a sufficient amount of fresh, whole
coffee beans are in the bean hopper (see: ‘Filling the Bean Hopper’).
3. Connect the espresso machine to a sufficient power outlet (see: ‘Important Safe-
guards for Electrical Appliances’).
4. Ensure that the selection dial at the left side of the group head is in the verti-
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42619 - Design Espresso Advanced Barista at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42619 - Design Espresso Advanced Barista in the language / languages: English, German as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info