41
In various foreign countries, the specifications for power supplies are sub-
ject to incompatible norms. Therefore it is possible that power supplies in
foreign countries do not meet the requirements for safe operation of the
appliance. Thus, before operating the appliance abroad, ensure that safe
operation is possible. Do not use any desk top multi socket outlet, external
timer, or remote control systems.
It is best to avoid using an extension cord, but if you wish to use one, ensu-
re that it is of sufficient length and rated for a maximum continuous current
of at least 16 A with safety plug and safety coupler plug and protective
conductor (earth/ground) connected properly.
When laying power cords, always ensure that no one will step on the
power cord or get entangled or trip over the power cords. Also, ensure
that no tension is applied to any part of the power cords. Tie the extensi-
on cord loosely onto the leg of the table using a separate cord, to ensu-
re that no one will pull the power cord. To connect: always connect the
appliance to the extension cord first. To disconnect: Always unplug the
extension cord from the power supply first.
• Always handle power cords with care. The pins of the power plug
must be smooth and clean. Always completely unwind the power cord
before use. Do not place the appliance on a power cord. Power cords
may never be knotted, twisted, pulled, strained or squeezed. Do not let
the plug or power cord hang over the edge of the table or counter. The
power cord may not touch hot surfaces or sharp edges. Ensure that no one
will pull the appliance by the power cord. Take care not to entangle in the
power cord. Always grasp the plug to disconnect the power cord. Do not
touch the appliance or power plug with wet hands when the appliance is
connected to the power supply.
• DO NOT pour or spill any liquids on or in the housing of the appli-
ance or the power cord. Do not place or immerse the appliance or power
cord in water or other liquids. Do not place the appliance on wet sur-
faces. When liquids overflowed or are spilled into the housing or power
cord, do not touch the appliance but immediately unplug the appliance.
Thereafter, clean the appliance and let it dry for at least 1 day (see: ‘Care
and Cleaning’).