12. You can increase the cooking time at any time of the process:
To increase the cooking time during operation: press the set key . The word STEAM-
ER flashes. Set up the desired cooking time, using the keys h and min. If no further indi-
cation is given for ca. 5 seconds, the appliance starts the count-down of the newly set
cooking time automatically.
Tip: After expiration of the cooking time an acoustic signal sounds (five beeps) and the
appliance starts the keep-warm function. KEEP WARM and the already expired keep-
warm time is displayed. This procedure can last up to 12 hours. Afterwards another
acoustic signal sounds (three beeps) and the appliance switches off automatically.
If you do not want to eat your meal directly after the expiration of the cooking time, we
recommend to use the time lag function (TIMER), to avoid loss of flavour and vitamin
content (see Programming the Time Lag Function).
13. After cooking, shut down the steamer:
Press the power button. The red heater indicator and the display go out.
Unplug the power cord and make sure the appliance has cooled to room temperature
before moving or cleaning it.
14. Always clean the appliance immediately after use.
CAUTION: Never leave any food dry up on the appliance or any parts of it. Always
empty the water container after use. See Care and Cleaning.
Programming the Time Lag Function
You can set up a time lag (TIMER) for the beginning of the cooking procedure. In this
case the cooking process will not start until expiration of the delay time.
To adjust the time lag function:
1. Prepare the appliance for cooking and switch on (see Operating Your Steamer).
2. Toggle to the adjustment of the time lag function (TIMER).
To activate the time lag function: with STEAMER flashing on the display, press the set
key . The word TIMER flashes and 00:00 is displayed.
To switch back to the cooking time: with TIMER flashing on the display, press the set key
again. If you did not set up any cooking time, the appliance will use the default cook-
ing time (20 minutes; 00:20).
3. Set up the desired delay time by pressing the keys h and min.
The maximum delay time is 12 hours 59 minutes (1:59).
If no further indication is given for ca. 5 seconds, the appliance starts the count-down of
the delay time automatically. After expiration of the delay time, the heating process and
count-down of the cooking time starts.
11
42510_Dampfgarer_Manual_engl_okt07.qxp 18.12.2007 10:09 Seite 11
