714679
62
Zoom out
Zoom in
Previous page
1/80
Next page
62
1. Prepare the appliance for operation (see above: ‘Preparing the Appliance for
Operation’). For this, fill the kettle with the desired amount of water between 0.5
litres (“500 ml/MIN”) and 1.2 litres (“1200 ml/Tea MAX”). Do not overfilling
the kettle, to avoid overflow, when the water is boiling or the ingredients for your
tea are swelling up.
2. Fill the tea filter with the ingredients for your tea.
3. Place the tea lid ring on top of the kettle and press it down to fix it. Close the
opening in the lid ring with the tea lid.
4. Select the desired tea program by pressing the “Tea” button several times until the
desired program is indicated on the top line of the display (see: ‘Tea Programs’).
The pre-set temperature for each tea program is shown on the display.
Note:
With the tea program “Ice”, only the steeping time can be set.
5. If you wish to change the temperature, turn the “°C/Time” knob, until the desired
temperature is displayed. Temperature values from 40°C to 100°C (boiling) are
possible.
6. If you wish to change the steeping time, press the “°C/Time” button for switching
to time display. Turn the “°C/Time” knob, until the desired time is shown. Time
values from 30 seconds (0m30s) to 10 minutes (10m00s) are possible. Using
the “°C/Time” button, you can switch between time and temperature as you like.
7. Press the “Start/Stop” button to start the program. The appliance will heat the
water within the kettle. As soon as the set temperature is reached, a signal sounds
and the “Start/Stop” button flashes. A count-up timer starts counting on the dis-
play.
WARNING: With high water temperature set, hot steam may escape when
removing the tea lid and the tea lid may be hot. Only touch the tea lid by the handle
and be aware of hot steam, when removing the tea lid.
8. Remove the tea lid and immerse the prepared tea filter into the kettle by hanging
the tea filter into the tea lid ring. If required, turn the tea filter on the lid ring until
it settles down. Thereafter replace the tea lid.
9. Press the “Start/Stop” button. The appliance will start a count-down timer with
the set time value and “Steeping” will appear on the left side of the display.
IMPORTANT: If you do not press the “Start/Stop” button, the appliance will wait
for approx. 10 minutes and thereafter shut off with an acoustic signal, to avoid use-
less energy consumption.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42438 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42438 in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info