714678

Gastroback 42434 Manual

60
Zoom out
Zoom in
Previous page
1/68
Next page
60
Problem Reason The Solution
You cannot start the desired
program.
The kettle is not placed on
the power base correctly.
Fill the kettle with at least 0.5 litres of water and place the
kettle on the power base. If required, turn the kettle on the
power base. Then try again.
The set temperature is
lower than or equal to the
current water temperature
within the kettle.
The set temperature must be higher than the current tempera-
ture within the kettle to start a program. Wait until the kettle
cooled down sufficiently, select a somewhat higher tempera-
ture, or carefully pour some cold water into the centre of
the kettle (see: ‘Adding Water during Operation’).
Water accumulates under
the power base or runs
down on the exterior of the
kettle.
There is too much water in
the kettle.
Immediately unplug the appliance. Then wipe dry the appli-
ance completely. Leave the appliance dry naturally for at
least 1 day. Always observe the maximum filling level when
filling (see: ‘Technical Specifications’).
You spilled some water
during filling or moving the
kettle.
Immediately unplug the appliance. Then wipe dry the appliance
completely. Leave the appliance dry naturally for at least 1 day.
Ensure not to spill water on the exterior of the kettle during fil-
ling. Always ensure to hold the kettle level when it is filled.
The kettle is leaking. Immediately unplug the appliance and wipe dry the appli-
ance completely. Then check the kettle for leakage. Do not
use the appliance, if the kettle is leaking.
The water has an
unpleasant taste.
This may happen on new
appliances or appliances
that are used only rarely.
Prepare the appliance for usage as described in chapter
‘Before First Use’. If the problem persists, fill the kettle with
1200 ml of water and add two teaspoons of soda. Bring the
water to the boil using the program “100°C / Hot Water”.
Then discard the water and clean the kettle thoroughly.
You left the water in the
kettle for too long.
Always discard residues of water or tea completely after usage
and at least rinse the kettle with clear tap water, before stan-
ding the kettle aside. However, after preparing tea, it is better
to clean the kettle after usage (see: ‘Care and Cleaning’).
When cooking tea within the
kettle, the interior of the kettle
may get coated with residues
of tea, causing a bitter taste,
when simply heating water.
At least, when using the appliance for cooking tea and, the-
reafter, heating clear water, thoroughly clean the kettle and
lid set (see: ‘Care and Cleaning’).
The program “100°C /
Hot Water” is used but the
water is not boiling.
For the keep warm function,
the maximum temperature is
limited to 90-95°C.
According to the pre-set course of this program, the water is
heated to the boil only shortly. Thereafter, the water tempe-
rature will drop a little. This is normal. No action required.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42434 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42434 in the language / languages: English, German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info