714678

Gastroback 42434 Manual

52
Zoom out
Zoom in
Previous page
1/68
Next page
52
the appliance near the edge of the working space or on inclined surfaces. Do not
operate the appliance in a tray or tub or on a metal surface to avoid high risk of
electric shock, when overflow or splashing of hot water occurs. To avoid overhea-
ting, before operation, always fill a sufficient amount of clear drinking water into the
kettle (at least 500 ml / MIN). Do not operate the appliance with the kettle empty.
Always remove the kettle from the base and wait until the kettle cooled down, before
filling the kettle anew. For adding water with a tea program running, slowly pour
the cold water into the middle of the kettle. Do not let cold water run down the side
walls of the kettle, if the kettle is hot.
Do not fill in more than the maximum amount (1200 ml MAX). If the kettle is over-
filled, boiling water may splash out. Regularly de-scale the kettle (see: ‘Care and
Cleaning’).
Important: For operation, always close the kettle via the lid ring and lid. With
the lid open, the temperature control will not operate correctly caused by high
energy loss.
Important: When using the keep warm function and pouring some water/tea,
always ensure that the filling level in the kettle did not drop below the MIN filling
level (500 ml), before placing the kettle back onto the power base and re-assu-
ming keep warm operation (see: ‘Keep Warm Function’).
PREPARING THE APPLIANCE FOR OPERATION
1. Completely unwind the power cord and place the power base on the designa-
ted working place near an appropriate wall power outlet (see: ‘General Safety
Instructions’ and ‘Important Safeguards for Electrical Appliances’).
2. Remove the kettle from the power base and remove the lid from the kettle by
turning it counter-clockwise and pulling it upwards.
3. Fill the required amount of clear drinking water into the kettle. For operation, the
filling level must be between MIN (500ml) and MAX (1200ml).
4. Ensure to close the kettle correctly via the lid set (see: ‘Knowing Your New Glass
Tea Kettle’): Push the lid ring down on the kettle until it settles firmly. There may
be no gap between lid ring and kettle. If required, turn the lid ring, until it fits
correctly. Insert the lid in the lid ring with the white line pointing to “Open”. Turn
the lid clockwise within the lid ring to “Close” for locking the lid securely.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42434 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42434 in the language / languages: English, German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info