31
MOVABLE AND SHARP-EDGED PARTS – RISK OF INJURY
• Never put fingers, wooden spoons or other foreign objects (such as hair,
clothing, brushes, cloths) into the feed chute or the holes of the grinding
disc when the appliance is plugged into the power point. Always ensu-
re that there are no foreign objects (such as bones, stems of vegetables
or wooden spoons) in the feed chute before turning on the appliance.
Only use the provided pusher to push food through the feed chute. Whi-
le proceeding do not push the pusher too hard down to avoid blocking
the motor.
• Take care handling the crossed-blade knife because it is very sharp.
• Never hold your face or other body parts over the feed chute when the
motor is running because little pieces of food could be thrown out of the
feed chute.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
• Always unwind the power cord completely before installing the appli-
ance.
• Place the appliance close to a power outlet and connect it directly wit-
hout using any extension cords to avoid additional risks of injury through
fire or voltage.
• Only install the appliance in proper form secure grounding receptacle
with adequate electric power supply (alternating current; 230 V, 50 Hz)
and ground fault circuit interrupter. You should also install a fuse with a
release current of maximum 30mA. If necessary ask your electrician for
help.
• Never pull, rip, bend, clamp, squish or knot the power cord. Pay attenti-
on to the power cord not hanging of the table. Attend to nobody getting
caught in loops of the power cord or pulling the appliance of the work
space. When pulling the plug always catch hold of the enclosure of the
plug.
