512658
26
Zoom out
Zoom in
Previous page
1/44
Next page
26
Please read all the advice and instructions with care and keep the manual.
The mincer is used for mincing meat (uncooked or cooked) and soft vegetables. Please
prepare the ingredients before filling them into the feed chute. Using the pusher you press
the food slowly into the worm which pushes it against the spinning crossed-blade knife.
The knife and the worm are driven by a 350 watt induction motor (max. 1,28 Nm).
The finished mince discharges through the grinding disc. The appliance has an overload
protection which prevents the motor from overheating.
The appliance is maintenance-free, very insusceptible and easy to use. All parts that
come into direct contact with food are easily to remove and easy to clean. No extra
tools are necessary for assembling or disassembling the appliance.
IMPORTANT INSTRUCTIONS
ATTENTION: Always ensure that the appliance is turned off (the control
switch should be in STANDBY position) before connecting the plug to the
power outlet.
Never assemble or disassemble crossed-blade knife, worm or grin-
ding disc when the plug is connected to the power outlet to avoid
personal injury.
Before first use rinse all the parts of the appliance with water that come
into contact with food and clean them with dishwashing detergent.
Note:
The display is illuminated only when the plug is connected to the power outlet. The
appliance will turn on only when the plug is connected to the power outlet.
ATTENTION: To avoid damage, do not use any abrasive cleaners, corro-
sive chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or
cleaning. Never clean or operate the appliance or parts of the appliance
with abrasive or hard sharp-edged items. Never put the motor housing or
the accessories in the dishwasher for cleaning! This will cause discoloura-
tion and corrosion and damage the motor.
To avoid personal injury always turn the appliance off by turning the con-
trol switch to STANDBY, wait for the motor to stop completely and pull
the plug before assembling or disassembling, cleaning or moving the
appliance.
While proceeding do not push the pusher too hard down to avoid blo-
cking the motor. Only use the provided pusher to guide food through the
feed chute.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41409 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41409 in the language / languages: English, German as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41409

Gastroback 41409 Manual - German - 2 pages

Gastroback 41409 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info