512657
50
Zoom out
Zoom in
Previous page
1/56
Next page
50
CARE AND CLEANING
WARNING: Do not insert your hands or any foreign objects in the feed tube or outlet
of the cutter housing, while the appliance is connected to the power supply.
The cutter blade is sharp-edged. Handle with care to avoid cutting your fingers.
Do not place or immerse the motor housing or power cord in water or any other liquids.
Do not spill any liquids on the motor housing or power cord. Do not pour any liquids in
the feed tube, while the cutter housing is assembled to the motor housing. Always dis-
connect the cutter housing from the motor housing, before assembling or disassembling
any tools or removing stubborn blockages.
Do not place the appliance or any part of it in an automatic dishwasher.
Do not leave any food dry up on the appliance or any parts of it to prevent a build up
of dried-on foods. Always clean the appliance after each use according to the follow-
ing instructions.
DISASSEMBLING THE APPLIANCE
WARNING! Always switch OFF the ON/OFF button and power switch, wait until
the motor comes to complete standstill, and unplug from power outlet, before disassem-
bling or cleaning the appliance.
1. Switch OFF the ON/OFF button and power switch, wait until the motor comes to
complete standstill, and unplug from power outlet.
2. Remove the pusher. Then lift the tablet upwards to remove it.
3. Grasp the cutter housing with one hand, then press the release button near the gear
hole in the front plate of the appliance. (See: Knowing Your Design Mincer)
4. With the release button pressed, unlock the cutter housing by turning it clockwise.
Then pull the cutter housing out of the motor housing.
5. Unscrew the screw ring and, thereafter, hold the cutter housing close over a plastic
bowl or kitchen sink and carefully turn the cutter housing with the outlet downwards.
This way, the parts within the cutter housing will fall out.
Possibly, for this you must impress the gear of the worm shaft in the cutter housing.
CLEANING THE APPLIANCE
WARNING: The edges of the cutter blade are very sharp. Handle with care to avo-
id injuries.
Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any
corrosive chemicals (e.g. bleach) for cleaning the appliance or any parts of it, to avoid
damage to the surfaces. Do not immerse the motor housing or power cord in water or
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41408 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41408 in the language / languages: English, German as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41408

Gastroback 41408 Manual - German - 2 pages

Gastroback 41408 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info