512656
57
Zoom out
Zoom in
Previous page
1/60
Next page
57
3. Grasp the cutter housing with one hand, then press the release button near the
gear hole in the front plate of the appliance. (See: ›Knowing Your Design Mincer
Plus‹)
4. With the release button pressed, unlock the cutter housing by turning it clockwise.
Then pull the cutter housing out of the motor housing.
5. Unscrew the screw ring.
6. Hold the cutter housing close over a plastic bowl or kitchen sink and carefully turn
the cutter housing with the outlet downwards. This way, the parts within the cutter
housing will fall out. Possibly, for this you must impress the gear of the worm shaft
in the cutter housing.
CLEANING THE APPLIANCE
WARNING! The edges of the cutter blade are very sharp. Handle with care to
avoid injuries.
Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any
corrosive chemicals (e.g. bleach) for cleaning the appliance or any parts of it, to
avoid damage to the surfaces. Do not immerse the motor housing or power cord in
water or any other liquid. Do not spill or drip any liquids on the motor housing, or on
the power cord to avoid risk of fire and electric shock. Do not use violence!
Do not place the appliance or any part of it in an automatic dishwasher!
1. Clean pusher, tablet, cutter housing, worm shaft, and screw ring, as well as any
used tools with warm dish-water and a nylon brush. If there are any tools within
the pusher, take the tools out first. Stubborn residues on the surfaces can be remo-
ved better by soaking in warm dishwater for some minutes.
2. Moisture a clean cloth or soft sponge with a little warm dishwater and carefully
wipe the exterior of the appliance and the power cord.
WARNING! Always ensure that the appliance and all parts of it are out of
reach of young children.
3. Thoroughly dry the motor housing and all parts, and let dry naturally for about
half an hour out of reach of young children.
4. It is good advice to lubricate the grinding discs and cutter blade with some vege-
table oil.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41403 in the language / languages: English, German as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41403

Gastroback 41403 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info