714683

Gastroback 41039 Manual

43
Zoom out
Zoom in
Previous page
1/52
Next page
43
Do not fill any liquids into the grinding jar. The grinding jar is suited for dry ingre-
dients only.
2. Place the motor base on a suitable surface near a suitable wall power outlet
(see: ‘General Safety Instructions’ and ‘Important Safeguards for Electrical Appli-
ances’).
3. Ensure that all parts are in proper working order.
4. Add the ingredients to the jar. However, at the maximum fill the transparent
jars to the MAX filling level. Fill the grinding jar only with 1/3 - 1/2 cup of dry
ingredients at the maximum. Ensure, that the brim of the jar is completely clean,
to get an airtight seal with the blade assembly.
IMPORTANT: In the base of the blade assembly, there is a silicone gasket seal ensu-
ring an airtight fit with the jars. Due to the heat from some dishwashers the gasket
seal could become loose.
5. Ensure that the silicone gasket seal in the base of the blade assembly is in place
correctly and completely clean. Then place the blade assembly onto the jar and
twist the blade assembly onto the jar until you get a good seal (approx. 1/8
revolutions).
6. Turn the jar upside down and ensure that the jar is completely leak-free
and closed tight.
The unit is now ready for use.
PROCESSING YOUR FOOD
1. Insert the plug into the power supply outlet to start operation.
2. Place the jar onto the motor base, aligning one of the arrows on the blade
assemby with the arrow on the motor base.
IMPORTANT: As soon as you turn the jar clockwise on the motor base the motor
starts agitating.
To avoid overheating, with runny ingredients do not operate the motor continuo-
usly for more than 1 minute. Dry ingredients may not be processed continuously
for more than 10 seconds. Allow the motor to rest for 1-2 minutes before conti-
nuing. However, the appliance will process your food within seconds. Thus, in
most cases, processing more than a few seconds will not be necessary. If the
blades get stuck or agitate noticeably slow, stop operation immediately and add
some liquid, or reduce the amount of ingredients in the jar.
The grinding jar is suited for grinding and milling dry ingredients and could get
hot during operation. After processing continuously for 10 seconds, leave the
motor and grinding jar cool down for at least 1 minute.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41039 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41039 in the language / languages: English, German as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info