714683
39
Zoom out
Zoom in
Previous page
1/52
Next page
39
IMPORTANT: Do not process alcoholic or carbonated or warm or hot food. For
operation, the jar is closed airtight. Thus, in these cases, high pressure could build
up in the jar causing leakage and damage to the appliance. Additionally, opening
the jar after operation could be difficulty, and the contents could splash vigorously.
Thus, always leave hot food cool down before operation!
For milling and grinding of hard ingredients (e.g. nuts), use the grinding jar and pro-
cess your food in small batches. However, do not fill in any liquids into the grinding
jar. The grinding jar works in a similar way to the other jars. Attach the blade assem-
bly in the same way, and place the jar upside down on the motor base for operation
(see: ‘Operation’). For most cases, we recommend operating the appliance in pulses.
SAFETY CONCEPT
WARNING: For your protection and convenience, your new »Design Personal
Blender Pro« is equipped with some safety features. Do not attempt to damage or
by-pass the safety interlocks! Do not attempt to operate the appliance using others
than the designated parts (e.g. jars, blade assembly).
The blender has a built-in safety lock. Thus, the motor will operate only with the
appliance assembled correctly. See: ‘Assembling the Appliance’. However, do not
attempt to operate the motor base without the jar and blade assembly in place.
If the appliance overheats, a thermal safety switch will shut off the motor. Thus,
if the motor stops unexpectedly, just unplug the appliance and remove the jar to pre-
vent the motor from starting unexpectedly when the thermal safety switch resets. Let
the appliance cool down for approximately 30 minutes. Thereafter, you can use the
appliance again.
Note:
Tripping of the thermal safety switch indicates that the appliance is being loaded
too heavily or with excessive continuous use. Reduce the amount of ingredients,
add some more liquid, or allow more time in between operation to prevent it from
happening again. This will help preserve the life of the motor.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41039 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41039 in the language / languages: English, German as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info