714695
41
Zoom out
Zoom in
Previous page
1/52
Next page
41
Cleaning the blades
1. Simply add ca. 0.5 Litre of dish-water to the glass jar.
2. Set the timer for 2 minutes and press the Simmer (›SIEDEN‹) button.
3. When the dish-water is hot, turn the heater off (press Simmer button again), and switch
the speed selector to speed selection 1 for ca. 1 minute.
4. Pour out the dish-water and repeat this procedure with pure tap water. This
will release food that maybe on the underside of the blades. For a thorough
cleaning of the glass jar follow the instructions in the section below.
Thorough Cleaning of the Glass Jar
1. Switch off, unplug and let the appliance cool down sufficiently.
2. Remove lid and measuring cup from the glass jar. Remove the rubber seal from the lid.
3. The glass part of the glass jar is mounted on the jar collar by
a right-hand thread. For a better access to the heating plate and
blades you may unscrew the glass part. Grasp the jar collar with
one hand and the handle of the glass jar with the other and twist
these parts against each other.
4. Clean glass part, lid, measuring cup, and rubber seal in warm dish
water, using a soft cloth or nylon brush. These parts can be cleaned
in an automatic dishwasher.
WARNING: The blades are very sharp. Handle with care to avoid injuries.
Do not immerse or place the motor base or power cord in any liquids or
pour any liquids on these parts.
5. Use a nylon brush or sponge and warm dish-water for cleaning the heating plate.
Doing so, be careful with the blades and do not damage the seal on the jar base.
Soak stubborn residues with a drop or two of cooking oil for some minutes, before clea-
ning.
Tip: Stubborn residues on the other surfaces can be removed better by moistening with
some warm dish-water before cleaning.
6. Wipe the power cord and the exterior of the motor base carefully with a soft
damp cloth. Always ensure not to spill any liquids into the motor base.
7. Thoroughly wipe the appliance and all its parts dry.
8. Allow drying naturally for ½ hour. Always ensure that the appliance and all its parts
and accessories are out of reach of young children.
9. Re-assemble the glass jar.
10
. Ensure that the sealing surfaces on the brim of the jar collar and glass part are clean
and without any damage (e.g. cracks, scratches, or signs of wear). Screw the glass part
tightly on the jar collar. Eventually check the glass jar for leaks using some water.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41020 in the language / languages: English, German as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info