714696
51
Zoom out
Zoom in
Previous page
1/72
Next page
lukewarm state before placing in the jug to avoid sudden bursts of steam that could cause
the lid to dislodge.
BEFORE USE
WARNING: DO NOT let young children play with the appliance or any part
of it or the packaging! The cutting blades are very sharp. Ensure not to get injured.
Always grasp the appliance at both sides at the bottom of the power base to move the appli-
ance. DO NOT grasp the appliance at the power cord or jug for moving it.
1. Unpack the appliance and all accessories carefully.
Keep all the packing material until all the parts of the Design Mixer have been found and the
appliance has been assembled.
To move the appliance, always grasp it at both sides at the bottom of the power base.
Tip: It is good advice to keep the packing material in a safe place in case you wish to repack
the product for storage or shipping.
2. The power cord is stored under the bottom of the power base. Carefully unwind the power
cord completely.
3. Check that no parts are missing. Check the Design Mixer for any damage (e.g. damaged
seals and sealing surface, broken, or scratched plastic parts). If there is any damage, do not
operate the appliance and contact an authorized service centre. See: Knowing Your »Design
Mixer Duo Advanced«
4. Carefully remove all shipping materials and promotional materials, but DO NOT remove
any warning labels or the model label. Especially ensure that there are no foreign objects
(e.g. packaging material) in the jug and drive shaft coupling of the power base.
WARNING – RISK OF ELECTRIC SHOCK
Always switch OFF (press ON/OFF button) and unplug the appliance and wait for
the motor to come to a complete standstill before cleaning. Do not immerse the power
base or power cord in water or other liquids or spill any liquids on/in the
power base or power cord. Do not place the power base or power cord in an automatic
dishwasher.
5. Before first use and after a longer period of storage, wash jug, lid, measuring cup and
citrus cone with warm soapy water, rinse with clear tap water and dry the exterior especially
at the bottom of the jug thoroughly. See: Care and Cleaning
Preparing the Appliance for Operation
IMPORTANT: Only place the appliance on a stable, dry, level and clean surface. Be aware
that, due to the agitation of the motor, the appliance could move around on the table during
operation. Thus, do not place the appliance on inclined surfaces or near the edge of the table,
where it can fall over and/or fall down. Do not place any clothes or tissue or other foreign
objects under the appliance during operation to avoid risk of fire, overheating or electric
shock. Do not block the ventilation slots of the power base. During operation, the operating
elements (see: Knowing Your »Design Mixer Duo Advanced«) must be accessible all the time.
Ensure to keep the appliance in an appropriate distance of at least 30 cm on each side to any
51
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41004 in the language / languages: English, German as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info