714622
76
Zoom out
Zoom in
Previous page
1/92
Next page
76
Problem Solution
Food is unevenly
chopped
Either too much food is being chopped at one time or the pieces are not small enough.
Try cutting food into smaller pieces of even size and processing a smaller amount per
batch. For best results the food should be chopped into pieces no larger than 2cm.
Food is chopped too
fine or is watery
The food is over processed. Use brief pulses or process for a shorter time.
Food sticks to blade Processing too much food. Turn the blender off and unplug the power cord. When the
knifes stop rotating, remove the blender lid and remove some food with a spatula.
The programs can not
be selected.
Turn the rotary switch to the ›program‹ position (the three indicator lights flash blue).
Now the programs are selectable.
CARE AND CLEANING
WARNING: To avoid injury to persons and damage, always turn the appliance
off, wait for the motor to stop completely and unplug the appliance, immediately after
operation and before assembling/disassembling or cleaning the appliance.
WARNING: Ware apropriate gloves if processing hot food. Ensure not to get
burned on spilled over liquids or steam.
ATTENTION: Do not use abrasive cleaners, cleaning pads, corrosive chemi-
cals (disinfectants, bleach) or any sharp or hard objects (i.e. metal scouring pads)
for cleaning, for this could damage the surfaces. Always handle the entire appli-
ance with care and without violence.
CLEANING THE BLENDER JUG
1. Empty the blender jug and rise it with warm water.
2. Place the blender jug on the motor block and ensure it is securely locked into position.
3. Fill the blender jug with 1 litre of warm soapy water (max. 60°C). The knife
should be covered with water. Close the blender jug with the lid. Turn the appli-
ance on using the Interval program. Let the motor run.
4. Turn the appliance off by turning the rotary switch to position ›0‹ (all buttons illu-
minations will go out), wait for the blade to stop moving, pull the plug out of the
power outlet and remove the blender jug off the motorblock.
5. Take the lid off the blender jug and pour out the water. Stubborn residues you
can remove using a nylon washing brush or sponge.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40986 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40986 in the language / languages: English, German as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 40986

Gastroback 40986 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info