714651
50
Zoom out
Zoom in
Previous page
1/80
Next page
50
Ensure that no one will pull the appliance by the power cord. Take
care not to entangle in the power cord. Always grasp the plug to dis-
connect the power cord.
Do not touch the motor unit or power plug with wet hands, while
the appliance is connected to the power supply. Do not place the
motor unit on wet or metal surfaces to avoid risk of fire and electric
shock. Do not immerse the motor unit or power cord in water or any
other liquid. DO NOT spill or drip any liquids on the motor unit or the
power cord. Carefully avoid vigorous splashing of food and liquids
during processing. If required, use another accessory or speed. The
appliance is not suited for processing hot food and liquids (above
60°C). Evaporating steam could be sucked into the motor unit, dama-
ging the motor and causing risk of electric shock and/or fire.
Always immediately wipe off liquids that are spilled or splashed onto
the motor unit. There are ventilation slits at the front and both sides of
the motor unit. Do not operate the appliance, when liquid splashed or
ran into the housing of the motor unit, thus getting into the interior of
the motor unit. In this case, immediately unplug the appliance. There-
after clean and dry the appliance thoroughly and leave the appliance
dry naturally for approx. 1 day.
MOVING PARTS - RISK OF INJURIES
Some tools of the Design Hand Mixer Pro are equipped with very
sharp blades. During operation, the blades are moved on high
speed. Thus, the appliance could cause severe injuries when handled
improperly.
Use caution, when handling the chopper knife or bar blender to avo-
id injuries. Always hold the bar blender and chopper knife by the
upper part of the shaft for handling.
The bar blender and chopper knife may not be disassembled. Do not
attempt to assemble the chopper knife to the motor unit without the
chopper container. Do not poke in the drive wheel compartment or
the tool couplings via any type of foreign objects.
DO NOT ATTEMPT TO USE THE BAR BLENDER OR WIRE TOOLS
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info