714651
27
Zoom out
Zoom in
Previous page
1/80
Next page
27
Tipp: Beim Füllen des Hackkruges können Sie einen kleinen Becher oder ein kleines
Glas über den Schaft des Hackmessers stülpen, damit die Kupplung des Hack-
messers sauber bleibt. Nehmen Sie diesen Schutz nach dem Füllen wieder herunter.
2. Füllen Sie die vorbereiteten Lebensmittel in den Hackkrug. Beachten Sie dabei
die MAX-Markierung am Hackkrug, damit die Lebensmittel nicht überlaufen und
Sie ein gutes Ergebnis erhalten. Vergewissern Sie sich, dass die Kupplung am
oberen, konischen Ende des Hackkrug-Deckels sauber ist.
3. Verschließen Sie den Hackkrug mit dem Deckel. Drehen Sie den Deckel im Uhr-
zeigersinn, um den Deckel auf dem Hackkrug zu verriegeln.
4. Öffnen Sie den Shutter an der Rückseite des Motorblocks am besten mit dem
Hackkrug-Deckel. Schieben Sie den Motorblock dazu über den Hackkrug-
Deckel. Wenn der Shutter offen ist, gleitet der Motorblock auf die Kupplung des
Hackkrug-Deckels. Fassen Sie den Hackkrug dazu am Henkel. Lassen Sie den
Motorblock auf dem Deckel nach unten gleiten. Der Motorblock muss stabil auf
dem Hackkrug-Deckel stehen.
5. Drehen Sie den Motorblock um ca. 90° im Uhrzeigersinn. Der Motorblock wird
dadurch spürbar auf dem Hacksystem verriegelt. Das Hacksystem ist betriebsbe-
reit, wenn der Motorblock sicher auf dem Hacksystem eingerastet ist.
Die Lebensmittel mit dem Hacksystem verarbeiten
WARNUNG: Niemals den Deckel des Hackkruges abnehmen und/oder in
den Hackkrug greifen oder irgendwelche Gegenstände in den Hackkrug halten,
wenn der Motorblock auf dem Deckel des Hacksystems installiert ist. Niemals den
Motorblock vom Hackkrug nehmen, solange der Motor noch läuft. Schalten Sie
das Gerät AUS (Funktionsschalter auf „0“), warten Sie, bis der Motor steht und
ziehen Sie den Netzstecker aus der Steckdose. Nehmen Sie immer zuerst den
Motorblock ab, bevor Sie das Hacksystem öffnen.
ACHTUNG: Das Hacksystem verarbeitet Ihre Lebensmittel in wenigen Sekunden.
Lassen Sie das Hacksystem nicht länger als 15 Sekunden kontinuierlich arbeiten,
um eine Überhitzung zu vermeiden. Warten Sie danach, bis der Motor vollständig
abgekühlt ist, bevor Sie das Gerät erneut verwenden.
6. Vergewissern Sie sich, dass das Hacksystem vollständig und richtig zusammenge-
setzt ist und der Motorblock richtig auf dem Hacksystem installiert ist (siehe oben).
7. Vergewissern Sie sich, dass der Funktionsschalter auf „0“ geschaltet ist. Stecken
Sie den Netzstecker in eine geeignete Wandsteckdose.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info