512588
29
Zoom out
Zoom in
Previous page
1/32
Next page
fire.Alwayshandlewithcareandwithoutviolence.
CAUTION:Donot use abrasive cleaners, cleaning pads, corrosive chemicals (disinfec-
tants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this
could damage the surfaces.
Note: after processing very salty ingredients clean the appliance immediately to avoid
stains and damage.
Carefully clean the appliance and the vessel with a damp sponge or cloth and warm
soapy water. Soak stubborn residues on the processing tools in warm dish-water for ca. 10
minutes and then remove the residues with a soft washing brush.
1. Always release the ON-button, wait for the motor to stop completely and unplug the
appliance from the power outlet before cleaning.
CAUTION: Always handle with care and without violence. To disassemble the processing
tools, press both release-buttons to release the lock.
2. Remove the used tool by pressing with one hand both release-buttons and grasping the
shaftoftheusedtoolwiththeotherhand.Thenremovetheprocessingtool.Clearthelefto-
ver food with a plastic or wooden spoon, pay attention not to scratch the vessel to avoid
damage.
3.Cleantheprocessingtoolswithasoftnylonwashingbrushandwarmdish-water.Rinse
the processing tools thoroughly under running water. Pay attention to the blades to avoid
injuries. Soak stubborn residues in warm dish-water for ca. 10 minutes before cleaning.
When processing strongly coloured food, colour change may occur on the plastic parts of
the appliance. Wipe these parts with vegetable oil before cleaning these. The vessel may
turn milky and dull over time. This will not affect the functions of the appliance.
4. Wipe the motor block and power cord with a damp soft cloth. Take care not to spill or
drip water or any other liquids on the motor housing.
5. Thoroughly dry the motor block and all parts of the appliance. Possibly leave the appli-
ance to airdry before assembling the appliance. Pay attention that all parts are out of reach
for children.
The stainless steel whisk (not the whisk holder), the blade for the chopper and the chopper
(not the chopper lid), the mixing vessel and both non-slip-rubber bases can be cleaned in
the dishwasher.
29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40974 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40974 in the language / languages: English, German as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 40974

Gastroback 40974 User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info