Manual Gastroback 40974 (page 25 of 32) (English, German)

512588

Zoom out

Zoom in

1/32

the ON-button, immerse the processing tool in the food (up to the half of its

height at most), to avoid excessive splashing and dripping of liquids onto

the appliance.

1. Prepare your food and fill it into a sufficiently large and high-sided vessel

(like the vessel provided).

WARNING: The provided vessel is not heat resistant. The max. tempera-

ture is 70 degrees. Let the boiling food cool down a little bit before starting

to blend.

Ensure, that the appliance is unplugged.

3. Place the shaft of the stainless steel blender onto the motor block and

press together until it snaps into place (see picture A). There may be no gap

between the motor housing and the stainless steel blender. The blender shaft

must be locked firmly and may not wobble (see picture B).

4.Immersethestainlesssteelblenderintothefood.Choosethespeedwith

the variable control switch. It is to be expected, that the food will splash

during operation. When processing hot meals, donot hold the appliance

in the rising steam to avoid condensation on the motor housing. Immediately

wipe off condensate on the motor housing. The lower part of the stainless

steel blender should be always covered with food to avoid splashing.

Note: Process food with a sufficient amount of liquid.

5.Connectthepowerplugtoasuitablewallpoweroutlet.

6. Hold on to the vessel with one hand and press the ON-button to start the

motor. Slowly circle the blender during operation. Hold the hand blender

uprightinthemixingvesselduringoperationtoavoidsplashing(seepictureC).

CAUTION: Do not use the appliance in continuous operation for more

than 1 minute to avoid overheating. If processing large quantities of food,

regularly interrupt the operation and unplug the appliance for a few minutes,

allow the motor to cool down.

7. Blend your food to the desired quality but at least after 1 minute of conti-

nuous operation release the ON-button.

8. Wait until the motor stops, before you lift the blending tool out of the food.

9. Always unplug the appliance immediately after operation. Lay down the

appliance on a stable, dry and clean surface, where it cannot fall.

WARNING: Always release the ON-button, wait until the motor stops

completely and unplug the appliance before assembling or dismantling the

blending tool.

10. Release the stainless steel blender form the motor block by pressing

bothrelease-buttons.Cleantheapplianceinaccordancetotheinstructionsin

chapter›Careandcleaning‹.Donot leave any food to dry on the surface

of the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40974 in the language / languages: English, German as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 40974

Gastroback 40974 User Manual - German - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 40974 Manual

Product: