714630
125
Zoom out
Zoom in
Previous page
1/132
Next page
125
3. Push the locking arm out of the support on the juicer cover and lower the locking
arm to the horizontal position.
4. Lift the juicer cover upwards to remove it.
5. Lift the juice collector upwards too. You will notice a slight resistance caused
by the drive coupling, because the juicing sieve will come out together with the
juice collector.
6. Take the pulp container away from the motor base and empty the pulp container.
7. Clean the parts of the juicing system always after operation. Do not leave any
food dry on the surfaces (see: ‘Cleaning the Juicing System’).
DISASSEMBLING THE OPTIONAL ACCESSORIES
For cleaning the mixing system or mincing system you may use the self-cleaning fea-
ture. For this, you do not need to disassemble the glass jug. However, when there
are still any residues of food on the surfaces the glass jug, sealing ring, or blade
assembly, you should clean the parts of the system separately (see: ‘Cleaning the
Optional Accessories’).
The grinding system must be disassembled anyway for getting out your food. Thus,
there is no benefit of performing a self-cleaning procedure. Always clean the parts
of the grinding system according to the instructions in section ‘Thorough Cleaning
and Removing Stubborn Residues’.
CLEANING THE MOTOR BASE
1. After operation, always turn the selection dial to the “OFF” position, switch OFF
the appliance at the power switch (position “O”), then unplug the appliance.
2. Remove the used processing system from the motor base (see: ‘Disassembling
the Juicing System’, ‘Removing the Glass Jugs After Operation’).
CAUTION: Always keep the motor base dry. Avoid spilling or dripping any
liquids onto the motor base. Do not use any hard objects to avoid damage to the
safety interlocks and surfaces.
3. Wipe the exterior of the motor base and power cord with a slightly damp, soft
cloth, removing any residues of splashes. Ensure that no liquids will run on or
under the motor base.
4. Polish with a soft dry cloth and leave dry naturally for approx. 30 minutes, where
the motor base is out of reach of young children.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info