714630
108
Zoom out
Zoom in
Previous page
1/132
Next page
108
system to and fro until it settles down easily on the drive rotor and achieves a
stable stand on the motor base.
CAUTION: For mounting or dismounting the mixing/mincing system at the
motor base, do not grasp the glass jug. Always grasp the collar of the blade
assembly to avoid damage to the thread connecting the glass jug and blade
assembly. Additionally, the connection could get over-tightened, making it extre-
mely difficulty to remove the blade assembly after operation.
7. Grasp the blade assembly with both hands by the collar and turn it clockwise
for fixing it to the motor base (turn it a little more than a finger's breadth after
feeling the first resistance). The appliance is now ready for operation.
CAUTION: Please keep in mind that the motor will start operation immediate-
ly, when connecting the appliance to the power supply, with the power switch and
selection dial in operating position. Thus, always switch the power switch to “O”
and selection dial to “OFF”, before plugging in the power plug.
8. Ensure that the selection dial and power switch are turned to the “OFF” position.
Then insert the power plug into an appropriate wall power outlet (see: ‘Important
Safeguards for Electrical Appliances’).
CAUTION: Do not remove the lid of the glass jug during operation! Other-
wise, due to the high power of the motor, liquids and food will be hurled out vio-
lently, and liquids will run down at the exterior of the glass jug. With hard ingre-
dients in the glass jug, always keep a hand on the lid.
Note
If the rotating speed slows down visibly during operation or the motor stalls, there
may be too much food in the glass jug, and/or there are too many too hard ingre-
dients blocking the knives (see: ‘Electronic Overload Protection’). Switch off the
appliance at the selection dial and power switch and unplug. Remove any obsta-
cles. If required, take out some food and process your food in smaller portions.
Tip: The appliance will process your food in seconds. It is better to intermediately
check the consistency of your food (after processing a few seconds) than to over-
process your food.
9. Switch the power switch at the rear of the motor base to the ON position (“I”).
Then, keeping one hand on the lid of the glass jug, turn the selection dial to
the desired speed level (see: ‘Tips for Best Results’). The motor starts agitating at
once. If not, in most cases, the threads of the processing system are not assem-
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info