714630
89
Zoom out
Zoom in
Previous page
1/132
Next page
89
used processing system is not closed correctly. Do not attempt to inactivate the
safety interlocks.
CAUTION: If the motor does not start when selecting a speed, always switch
off the appliance before checking, which safety interlock of the appliance is not
closed correctly. When in operational mode (display is illuminated), the motor will
start agitating IMMEDIATELY as soon as the affected safety interlocks are enga-
ged.
Self-Resetting Overheat Protection Device
If overheating occurs, the appliance will automatically stop operation at once, which
safeguards against overheating of the motor and ensures an elongated working life
of the motor. If the overheat protection device is triggered, switch off the appliance
completely (turn the selection dial to “OFF” and switch off at the rear power switch),
remove the power plug from the mains power supply and leave the motor cool down
by waiting approx. 30 minutes. Overheating may be caused by …
too much food in the processing system. Always observe the MAX filling levels
of the various processing systems as given in chapter ‘Technical Specifications’.
When juicing, do not push down your food with too much pressure. Take out
some food and try again.
too hard ingredients or too much fibres obstructing the processing system. Maybe
another processing system/blade assembly is required. Please observe the recom-
mends given in section ‘Selecting the Optimum Processing System’.
the appliance has been operated continuously for an elongated time. Especial-
ly with the optional accessories, the appliance will process your food within
seconds. It is better to avoid over-processing. However, if an elongated proces-
sing time is really required, you need to make sufficient brakes.
hard ingredients or too much fibres are gridlocked within the knives and block the
drive. Remove the used processing system from the motor base and remove the
obstacle (see: ‘Operation’ and ‘Care and Cleaning’). Perhaps, you need to use
another processing system for processing your food (see: ‘Selecting the Optimum
Processing System’).
Tip: You may use the required time for cooling down (approx. 30 minutes) to
remove any obstacles and blockages in the used processing system and preparing
another portion of your food. After solving the problem and leaving the motor cool
down, you can reactivate the appliance quite as normal.
Important: For performing the reset, the appliance MUST be unplugged from the
power outlet.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info