714632

Gastroback 40145 Manual

68
Zoom out
Zoom in
Previous page
1/88
Next page
EN
68
ged. Install the central sealing ring at the top of the inner tube. The groove of the
sealing ring must be attached to the rim of the inner tube even and without wrinkles.
3. Push the dark rubber flap at the bottom of the juice collector into the slit of the
pulp outlet. Firmly and evenly press the rubber flap into the slit.
WARNING – Before operating the appliance, always ensure that the
sealing ring is mounted correctly on the inner tube of the juice collector, and the
pulp outlet is closed correctly via the rubber flap. Also ensure that the exterior of
the juice collector and the shaft of the squeezing auger are clean and dry, before
mounting these parts to avoid that residues of food and liquids get into the motor
base and/or cause leakage of the sealing ring.
4. Place the juice collector on the motor base with the pulp outlet facing to the left.
Align the white marking lines at the bottom of the juice collector and at the top
plate of the motor base (in front of the juicer post). If required, rotate the juice
collector to and fro a little until the juice collector slips down onto the motor base,
coming to a stable stand.
5. Insert the rubber blade sleeve into the juice collector. With the rubber blade
sleeve assembled correctly, the small, dark cogwheel at the bottom of the juice
collector rotates, when turning the rubber blade sleeve.
6. Insert the filter sleeve into the juice collector. On the upper rim of the filter sleeve,
there is a small arrow. Align this arrow with the white marking line at the juicer
post of the juicer base, while pressing the juice collector down gently until it is
mounted stable and cannot be turned.
7. Insert the squeezing auger with the gear rim facing downwards into the filter
sleeve and push the squeezing auger without violence down into the filter slee-
ve until the squeezing auger is placed without wobbling in the filter sleeve. If
required, move the squeezing auger to and fro a little to make it settle stably
within the filter sleeve.
NOTE
With the parts positioned correctly, the rim of the filter sleeve protrudes the juice
collector approx. 14 mm and only the upper stainless steel shaft of the squeezing
auger sticks out of the filter sleeve.
CAUTION – Do not use violence. You cannot lock the juicer cover, if there
is still a gap between juicer cover and juice collector. In most cases, the squeezing
auger needs to be pushed down a little deeper. It may help to move the squeezing
auger a little for this.
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40145 in the language / languages: English, German as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info