Manual Gastro-Cool GCDC 1011 (page 35 of 64) (English, German, Dutch)

661956

Zoom out

Zoom in

1/64

English

8 Operation

8.1 Switching the appliance on

In order to switch on the appliance push the mains plug into the socket.

8.2 Setting the temperature

The temperature can be set at from 0°C to 10°C. It is set by pressing

the following buttons:

1. Press „SET“ button, the set temperature is displayed.

2. Press UP (warm) and DOWN (cold) button to set the new temperature.

3. Press „Set“ again to save and exit the adjustment.

4. If no more button is pressed within 10 seconds the actual cooler

inside temperature will be displayed.

NOTE

Please note that the temperature will change depending on the

ambient temperature (installation site), the frequency of opening

the door and the ﬁ ttings.

IMPORTANT

High room temperatures (such as e.g. on hot summer days)

and a cold temperature setting can lead to continuous

refrigerator operation. The reason for this is that the

compressor has to run continuously in order to maintain the

low temperature in the appliance. The appliance is not able

to defrost automatically because this is only possible when

the compressor is not running (see the defrosting section).

Therefore, a thick layer of frost or ice may form on the rear

interior wall.



Down

°C

SET

GCDC411_DC811_1011_UC311_Manual_DE_EN_NL_DIN A5_1611.indd 35GCDC411_DC811_1011_UC311_Manual_DE_EN_NL_DIN A5_1611.indd 35 06.12.2016 17:35:5306.12.2016 17:35:53

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastro-Cool GCDC 1011 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastro-Cool GCDC 1011 Manual

Product: