621171

Gartenmeister Elektro-Heckenschere GM 7160 861579 Manual

15
Zoom out
Zoom in
Previous page
1/80
Next page
11
GB
ENGLISH
Power tool description
1. Safety switch
2. Front hands protection
3. Knife/cutter bar
4. eyelet wall mounting
5. Knife/cutter bar protection
6. cable strain relief
7. Power supply cable
8. ON/OFF switch
9. rotary handle lock
Specied Conditions Of Use
The hedge trimmer is designed for trimming shrubs
and hedges in private hobby gardens
The device must not be used for crushing compost,
as persons or damage to property können.The hedge
trimmer is designed for trimming shrubs and hedges
in private hobby gardens.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
The charger may only be operated with a
protective switch against stray current (RCD
max. stray current 30mA).
Requirements for operating sta
The operating sta must carefully read the Opera-
tingInstructions before using the appliance.
Qualication : Apart from the detailed instructions
by aprofessional, no special qualication is necessary
forappliance using.
Minimum age : Persons over 18 years of age can
only workon the appliance.An exception includes
youngsters trained in order to reachknowledge
under supervision of the trainer duringoccupational
education.
Training : Using the appliance only requires corre-
spondingtraining by a professional or the Operating
Instructions. Nospecial training is necessary.
The operator is responsible for accidents or risks to
third parties.
Observe to keep out of dangerous zone
Technical Data
Hedge trimmer ................................................GM 7160
Art. No ............................................................................................5335
Service connection ...................................230 V~50 Hz
Motor output .....................................................710 W/P1
knife movement ............................................. 1700 min
-1
knife Spacing ...........................................................24 mm
Cutting length ......................................................600 mm
Beam length .........................................................690 mm
Weight ..........................................................................3,6 kg
Degree of protection ...............................................IP 20
Protection class ...................................................................II
Noise and Vibration Information
Sound pressure level L
PA
1)
..............................................81 dB (A)
Measured sound power level L
WA
1)
.........100,44 dB (A)
Guaranteed sound power level L
WA
........102 dB (A)
Wear ear protectors!
Schwingungsemissonswert Vorderer Gri a
h
2)
......5,094 m/s
2
Schwingungsemissonswert Hinterer Gri a
h
2)
......3,854 m/s
2
1)
Uncertainty K= 3 dB (A),
2)
Uncertainty K= 1,5 m/s
2
Warning: The vibration emission level will vary because
of the ways in which a power tool can be used and may
increase above the level given in this information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load shouldalso
take into account the times when the tool isshut down
or when it is running but not actually inuse. This may
signicantly reduce the vibratoryload over the total
working period.
Identify additional safety measures to protect theope
-
rator from the eects of vibration such as maintain
the tool and the accessories, keep thehands warm,
organisation of work patterns.
Read and understand the operating
instructions before using the appliance. Abide by all
the safety measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gartenmeister Elektro-Heckenschere GM 7160 861579 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gartenmeister Elektro-Heckenschere GM 7160 861579 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info