801380
20
Zoom out
Zoom in
Previous page
1/26
Next page
Upgrading Your Rally 100 to a Dual Sensing System
Before you install the new right pedal, the left pedal must be paired and connected to a compatible Edge device
or the Garmin Connect app.
1Review the Rally installation instructions (Installing the Rally Components, page1).
2Remove the existing right pedal.
3Install the new right pedal (Installing the Pedals, page2).
4Rotate the crank arm.
5Select an option to connect the right pedal to the left pedal:
From your compatible Edge device, select > Sensors, select your sensor, select Sensor Details > Pair
Right Power Sensor, and enter the sensor ID found on the pedal.
From the Garmin Connect app device settings, enable the Right Pedal, and enter the sensor ID found on
the pedal.
Changing Your Rally Pedals
NOTICE
Garmin recommends changing one pedal at a time taking care to keep track of the small screws and seals. You
must obtain a 4 mm hex key, PH 00 screwdriver, 15 mm pedal wrench, 12 mm socket with an outer diameter
that is less than 17 mm (typically a 1/4 in. drive) on a torque wrench, and bike grease. Use care not to damage
any of the Rally components.
This procedure shows the Rally RS and the Rally XC pedals. The procedure is the same for any Rally series pedal
conversion.
NOTE: If you have the single-sided Rally system, the right pedal has no battery carriage.
1Use a 15 mm pedal wrench to remove the Rally RS pedals.
NOTE: The left pedal spindle has a left-handed (reverse) thread attaching it to the crank arm.
2Use a 4 mm hex key to remove the battery cover .
16 Appendix
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin XC 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin XC 100 in the language / languages: English as an attachment in your email.

The manual is 3.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin XC 100

Garmin XC 100 User Manual - German - 28 pages

Garmin XC 100 User Manual - Dutch - 28 pages

Garmin XC 100 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info