Manual Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 (page 64 of 78) (English)

691427

Zoom out

Zoom in

1/78

Configuring NMEA 0183 Output Sentences

You can enable and disable NMEA 0183 output sentences.

Select Settings > Communications > NMEA 0183 Setup >

Output Sentences.

Select an option.

Select one or more NMEA 0183 output sentences, and select

Back.

Repeat steps 2 and 3 to enable or disable additional output

sentences.

Setting the Communication Format for Each NMEA 0183

Port

You can configure the communication format for each internal

NMEA 0183 port when connecting your chartplotter to external

NMEA 0183 devices, a computer, or other Garmin devices.

Select Settings > Communications > NMEA 0183 Setup >

Port Types.

Select an input or output port.

Select a format:

• To support the input or output of standard NMEA 0183

data, DSC, and sonar NMEA input support for the DPT,

MTW, and VHW sentences, select NMEA Std..

• To support the input or output of standard NMEA 0183

data for most AIS receivers, select NMEA High Speed.

• To support the input or output of Garmin proprietary data

for interfacing with Garmin software, select Garmin.

Repeat steps 2–3 to configure additional input or output

ports.

NMEA 2000 Settings

Select Settings > Communications > NMEA 2000 Setup.

Device List: Displays the devices connected to the network.

Label Devices: Changes the labels for available connected

devices.

Naming Devices and Sensors on the Network

You can name devices and sensors connected to the Garmin

Marine Network and the NMEA 2000 network.

Select Settings > Communications.

Select Marine Network or NMEA 2000 Setup > Device List.

Select a device from the list on the left.

Select Change Name.

Enter the name, and select Done.

Marine Network

The Marine Network allows you to share data from Garmin

peripheral devices with the chartplotters quickly and easily. You

can connect a chartplotter to the Marine Network to receive data

from and share data with other devices and chartplotters that

are compatible with the Marine Network.

Select Settings > Communications > Marine Network.

EVC Network

Select Settings > Communications > EVC Network, and

select a driveline.

For more information, refer to the Volvo Penta manual.

Features: Shows a list of installed EVC features.

Components: Shows a list of installed hardware components.

Software: Shows a list of software versions for installed EVC

features.

Calibration: Shows a list of installed EVC features that can be

calibrated.

Setting Alarms

Navigation Alarms

Select Settings > Alarms > Navigation.

Arrival: Sets an alarm to sound when you are within a specified

distance or time from a turn or a destination.

Anchor Drag: Sets an alarm to sound when you exceed a

specified drift distance while anchored.

Off Course: Sets an alarm to sound when you are off course by

a specified distance.

Setting the Anchor Drag Alarm

You can set an alarm to sound if you have moved more than an

allowable distance. This is very useful when anchoring

overnight.

Select Settings > Alarms > Navigation > Anchor Drag.

Select Alarm to turn on the alarm.

Select Set Radius, and select a distance on the chart.

Select Back.

System Alarms

Alarm Clock: Sets an alarm clock.

Unit Voltage: Sets an alarm to sound when the battery reaches

a specified low voltage.

GPS Accuracy: Sets an alarm to sound when the GPS location

accuracy falls outside the user-defined value.

Sonar Alarms

NOTE: Not all options are available on all transducers.

From an applicable sonar view, select Menu > Sonar Setup >

Alarms.

You can also open the sonar alarms by selecting Settings >

Alarms > Sonar.

Shallow Water: Sets an alarm to sound when the depth is less

than the specified value.

Deep Water: Sets an alarm to sound when the depth is greater

than the specified value.

FrontVü Alarm: Sets an alarm to sound when the depth in front

of the vessel is less than the specified value, which can help

you avoid running aground (Setting the FrontVü Depth Alarm,

page 31). This alarm is available only with Panoptix FrontVü

transducers.

Water Temp.: Sets an alarm to sound when the transducer

reports a temperature that is 2°F (1.1°C) above or below the

specified temperature.

Contour: Sets an alarm to sound when the transducer detects a

suspended target within the specified depth from the surface

of the water and from the bottom.

Fish

Fish: Sets an alarm to sound when the device detects a

suspended target.

• sets the alarm to sound when fish of all sizes are

detected.

• sets the alarm to sound only when medium or large

fish are detected.

• sets the alarm to sound only when large fish are

detected.

Setting Weather Alarms

Before you can set weather alarms, you must have a compatible

chartplotter connected to a weather device, such as a GXM

device, and have a valid weather subscription.

Select Settings > Alarms > Weather.

Turn on alarms for specific weather events.

56 Device Configuration

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 in the language / languages: English as an attachment in your email.

The manual is 8,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 User Manual - German - 88 pages

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 User Manual - Dutch - 84 pages

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 User Manual - French - 242 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 Manual

Product: