Manual Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 (page 21 of 66) (English)

691431

Zoom out

Zoom in

1/66

For example, if the last time you recorded had a sonar depth

of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),

enter -0.5 m (-1.5 ft.) for the a Recording Offset value.

User Display Offset: Sets differences in contour depths and

depth labels on your own contours maps to compensate for

changes in the water level of a body of water, or for depth

errors in recorded maps.

Comm. Display Offset: Sets differences in contour depths and

depth labels on the community contours maps to compensate

for changes in the water level of a body of water, or for depth

errors in recorded maps.

Survey Coloring: Sets the color of the Garmin Quickdraw

Contours display. When this setting is turned on, the colors

indicate the quality of the recording. When this setting is

turned off, the contour areas use standard map colors.

Green indicates good depth and GPS position, and a speed

under 16 km/h (10 mph). Yellow indicates good depth and

GPS position, and a speed between 16 and 32 km/h (10 and

20 mph). Red indicates poor depth or GPS position, and a

speed above 32 km/h (20 mph).

Depth Shading: Specifies the minimum and maximum depths of

a depth range and a color for that depth range.

Depth Range Shading

You can set color ranges on your map to show the water depths

where your target fish are currently biting. You can set deeper

ranges to monitor how quickly the bottom depth changes within

a specific depth range. You can create up to ten depth ranges.

For inland fishing, a maximum of five depth ranges can help

reduce map clutter.

Red From 0 to 1.5 m (from 0 to 5 ft.)

Orange From 1.5 to 3 m (from 5 to 10 ft.)

Yellow From 3 to 4.5 m (from 10 to 15 ft.)

Green From 4.5 to 7.6 m (from 15 to 25 ft.)

Navigation with a Chartplotter

CAUTION

If your vessel has an autopilot system, a dedicated autopilot

control display must be installed at each steering helm in order

to disable the autopilot system.

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: Some chart views are available with premium charts, in

some areas.

To navigate, you must choose a destination, set a course or

create a route, and follow the course or route. You can follow

the course or the route on the Navigation chart, Fishing chart,

Perspective 3D chart view, or Mariner’s Eye 3D chart view.

You can set and follow a course to a destination using one of

three methods: Go To, Route To, or Auto Guidance.

Go To: Takes you directly to the destination. This is the

standard option for navigating to a destination. The

chartplotter creates a straight-line course or navigation line to

the destination. The path may run over land and other

obstacles.

Route To: Creates a route from your location to a destination,

allowing you to add turns along the way. This option provides

a straight-line course to the destination, but allows you to add

turns into the route to avoid land and other obstacles.

Auto Guidance: Uses the specified information about your

vessel and chart data to determine the best path to your

destination. This option is available only when using a

compatible premium chart in a compatible chartplotter. It

provides a turn-by-turn navigation path to the destination,

avoiding land and other obstacles (Auto Guidance,

page 16).

When you are using a compatible Garmin autopilot

connected to the chartplotter using NMEA 2000

, the

autopilot follows the Auto Guidance route.

NOTE: Auto Guidance is available with premium charts, in

some areas.

Basic Navigation Questions

Question Answer

How do I make the

chartplotter point me in the

direction in which I want to go

(bearing)?

Navigate using Go To (Setting and

Following a Direct Course Using Go To,

page 14).

How do I make the device

guide me along a straight line

(minimizing cross track) to a

location using the shortest

distance from the present

location?

Build a single-leg route and navigate it

using Route To (Creating and

Navigating a Route From Your Present

Location, page 15).

How do I make the device

guide me to a location while

avoiding charted obstacles?

Build a multi-leg route and navigate it

using Route To (Creating and

Navigating a Route From Your Present

Location, page 15).

How do I make the device

steer my automatic pilot?

Navigate using Route To (Creating and

Navigating a Route From Your Present

Location, page 15).

Can the device create a path

for me?

If you have premium maps that support

Auto Guidance and are in an area

covered by Auto Guidance, navigate

using Auto Guidance (Setting and

Following an Auto Guidance Path,

page 16).

How do I change the Auto

Guidance settings for my

boat?

See Auto Guidance Path

Configurations, page 16.

Destinations

You can select destinations using various charts and 3D chart

views or using the lists.

Searching for a Destination by Name

You can search for saved waypoints, saved routes, saved

tracks, and marine services destinations by name.

Select Info > Services > Search by Name.

Enter at least a portion of the name of your destination.

If necessary, select Done.

The 50 nearest destinations that contain your search criteria

appear.

Select the destination.

Selecting a Destination Using the Navigation Chart

From the Navigation chart, select a destination.

Navigation with a Chartplotter 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 in the language / languages: English as an attachment in your email.

The manual is 6,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 User Manual - German - 74 pages

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 User Manual - Dutch - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 Manual

Product: