691428

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Manual

51
Zoom out
Zoom in
Previous page
1/74
Next page
1
From an applicable gauges screen, select Menu > Set
Gauge Limits.
2
Select a gauge to customize.
3
Select an option:
• To set the minimum value of the standard operating
range, select Rated Min..
• To set the maximum value of the standard operating
range, select Rated Max..
• To set the lower limit of the gauge lower than the rated
minimum, select Scale Min..
• To set the upper limit of the gauge higher than the rated
maximum, select Scale Max..
4
Select the limit value.
5
Repeat steps 4 and 5 to set additional gauge limits.
Configuring the Tank Level Sensors
NOTICE
You must connect fuel sensors to inputs 1, 2, 3, or 4.
1
Select Settings > My Vessel > Seven Marine Installation >
Tank Preset.
2
Select a tank level sensor to configure.
3
Select Name, enter a name, and select Done.
4
Select Type, and select the type of sensor.
5
Select Style, and select the style of sensor.
6
Select Tank Capacity, enter the capacity of the tank, and
select Done.
7
Select Calibration, and follow the on-screen instructions to
calibrate the tank levels.
If you do not calibrate the tank levels, the system uses
default settings for the tank levels.
Setting the Fuel Alarm
You can set an alarm to sound when the total amount of
remaining onboard fuel reaches the level you specify.
1
Select Settings > Alarms > Fuel.
2
If necessary, select a driveline.
3
Select On.
4
Enter the remaining amount of fuel that triggers the alarm.
5
If necessary, repeat steps 2–4 for all drivelines.
Viewing Graphs
Before you can view graphs of various environmental changes,
such as temperature, depth, and wind, you must have an
appropriate transducer or sensor connected to the network.
1
Select Info > Graphs.
2
Select a graph.
Setting the Graph Range and Time Scales
You can indicate the amount of time and the range of depth that
appear in the depth and water temperature graphs.
1
From a graph, select Graph Setup.
2
Select an option:
• To set a time-elapsed scale, select Duration. The default
setting is 10 minutes. Increasing the time-elapsed scale
allows you to view variations over a longer period of time.
Decreasing the time-elapsed scale allows you to view
more detail over a shorter period of time.
• To set the graph scale, select Scale. Increasing the scale
allows you to view more variation in readings. Decreasing
the scale allows you to view more detail in the variation.
Adjusting the Active Trim
Active trim controls the amount of pitch and roll of your boat.
Pitch is the forward and backward motion of your boat on its
center axis, relative to the surface of the water. Roll is the
side-to-side motion of your boat on its center axis. You can
adjust the active trim to limit the amount of degrees your pitch
and roll are from your desired trim levels.
1
Select OneHelm™, A/V, Gauges > Active Trim.
2
Select an option:
• To adjust the forward and backward motion, select Active
Pitch.
• To adjust the side-to-side motion, select Active Roll.
Adjusting the Active Trim Sensitivity
You can adjust the active trim sensitivity to limit the amount of
degrees your pitch and roll are from your desired trim levels.
1
Select OneHelm™, A/V, Gauges > Active Trim > Menu >
Active Sensitivity.
2
Adjust the level of sensitivity.
Viewing Graphs
Before you can view graphs of various environmental changes,
such as temperature, depth, and wind, you must have an
appropriate transducer or sensor connected to the network.
Select Info > Trip & Graphs > Graphs.
Setting the Graph Range and Time Scales
You can indicate the amount of time and the range of depth that
appear in the depth and water temperature graphs.
1
From a graph, select Graph Setup.
2
Select an option:
• To set a time-elapsed scale, select Duration. The default
setting is 10 minutes. Increasing the time-elapsed scale
allows you to view variations over a longer period of time.
Decreasing the time-elapsed scale allows you to view
more detail over a shorter period of time.
• To set the graph scale, select Scale. Increasing the scale
allows you to view more variation in readings. Decreasing
the scale allows you to view more detail in the variation.
Vessel Information
When the chartplotter is connected to a compatible EVC 2.0
Volvo Penta engine, you can view information about the engine.
Select Info > Vessel Info.
Maintenance Assistant
When the chartplotter is connected to a compatible Volvo Penta
engine, you can view the time to the next engine service, in
engine hours remaining and days remaining.
Select Info > Vessel Info > Maintenance Assistant.
After you have serviced the engine, select the engine, and
select Reset Service Reminder.
Oil Level Information
When the chartplotter is connected to a compatible Volvo Penta
engine and an engine oil level sensor or a transmission oil level
sensor, you can view information about the engine oil level and
transmission oil level.
Vessel Information 43
… 51 …


Need help? Post your question in this forum.

Forumrules
1

Forum

garmin-volvo-penta-glass-cockpit-gpsmap-722

Reset search

  • How do I connect a non garmin camera to the Volvo Penta Glass cockpit (B-Series)? I would like to see and record my kids and they participate in watersports behind the boat as I drive. Submitted on 2-8-2023 at 21:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 in the language / languages: English as an attachment in your email.

The manual is 7,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info