Manual Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (page 48 of 74) (English)

691428

Zoom out

Zoom in

1/74

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

Learn to operate the autopilot on calm and hazard-free open

water.

Use caution when operating the autopilot near hazards in the

water, such as docks, pilings, and other boats.

CAUTION

When using the autopilot features, be prepared for sudden

stops, acceleration, and turns.

When stowing or deploying the motor, be aware of the risk of

entrapment or pinching from moving parts, which can result in

injury.

When stowing or deploying the motor, be aware of slick surfaces

around the motor. Slipping when stowing or deploying the motor

may result in injury.

You can connect the Force trolling motor to the chartplotter to

view and control the motor using the chartplotter.

Connecting to a Trolling Motor

You can connect the chartplotter wirelessly to a compatible

Garmin Force trolling motor on your boat to control the trolling

motor from the chartplotter

Turn on the chartplotter and the trolling motor.

Enable the Wi‑Fi network on the chartplotter (Setting Up the

‑

Fi Wireless Network, page 6).

Make sure that this chartplotter is the host of the network

(Changing the Wi

‑

Fi Host, page 6).

On the chartplotter, select Settings > Communications >

Wireless Devices > Garmin Trolling Motor.

On the trolling motor display panel, press three times to

enter pairing mode.

on the trolling motor display panel is solid blue as it

searches for a connection to the chartplotter, and turns green

when the connection is successful.

After the chartplotter and trolling motor connect successfully,

enable the trolling motor overlay bar to control the motor (Adding

the Trolling Motor Controls to Screens, page 40).

Adding the Trolling Motor Controls to

Screens

After you have connected the chartplotter to the Force trolling

motor, you must add the trolling motor control bar to screens to

control the trolling motor.

Open a screen from which you would like to control the

trolling motor.

Select an option:

• From a combination page or SmartMode layout, select

Menu > Edit > Overlays.

• From a full screen, select Menu > Edit Overlays.

Select Top Bar or Bottom Bar.

Select Trolling Motor Bar.

Repeat these steps to add the trolling motor controls to all of the

screens from which you would like to control the trolling motor.

Trolling Motor Control Bar

The trolling motor control bar allows you to control a Force

trolling motor and see the status of the motor.

Select an item to engage it. The button illuminates when

selected. Select the item again to disengage it.

Trolling motor battery status.

Turns the propeller on and off.

Reduces the speed.

Speed indicator.

Increases the speed.

Enables the cruise control at the current speed over ground

(SOG).

Engages the propellor at full speed.

Trolling motor status.

Enables anchor lock, which uses the trolling motor to hold your

position.

Steers the trolling motor.

When in anchor lock, jogs the anchor lock position forward,

backward, left, or right.

Enables heading hold (set and maintain the current heading).

When the trolling motor is in heading hold, an autopilot bar

appears in the trolling motor bar.

Opens the trolling motor settings.

Trolling Motor Settings

From the trolling motor bar, select .

Calibrate: Calibrates the trolling motor compass (Calibrating the

Trolling Motor Compass, page 40) and sets the trolling

motor bow offset (Setting the Bow Offset, page 41).

Anchor Gain: Sets the response of the trolling motor when in

anchor lock mode. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Navigation Gain: Sets the response of the trolling motor when

navigating. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Heading Hold Mode: Sets the heading hold mode. The Vessel

Align option attempts to keep the boat pointing in the same

direction. The Go To option attempts to navigate a straight

line in the requested direction.

Auto Power On: Turns on the trolling motor when you apply

power to the system.

Prop. Stow Side: Sets which side of the trolling motor the

propellor rotates to when stowing the trolling motor. This is

helpful when you store other items near the stowed propellor.

Shortcut Keys: Enables the shortcut keys on the trolling motor

remote control to work with this particular chartplotter. The

keys work with only one chartplotter at a time.

Restore Defaults: Resets the trolling motor settings to the

factory default values.

Assigning a Shortcut to the Trolling Motor Remote

Control Shortcut Keys

You can quickly open commonly used screens by assigning a

shortcut key on the trolling motor remote control. You can create

a shortcut to screens, such as sonar screens and charts.

Open a screen.

Hold a shortcut key.

TIP: The shortcut is also saved to the Favorites category with

the shortcut key number.

Calibrating the Trolling Motor Compass

You must calibrate the compass in the trolling motor before you

can use the autopilot features.

Drive the boat to an open area of calm water.

40 Force

™

Trolling Motor Control

How do I connect a non garmin camera to the Volvo Penta Glass cockpit (B-Series)? I would like to see and record my kids and they participate in watersports behind the boat as I drive. Submitted on 2-8-2023 at 21:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 in the language / languages: English as an attachment in your email.

The manual is 7,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 User Manual - Dutch - 82 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Manual

Product: