Manual Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (page 26 of 74) (English)

691428

Zoom out

Zoom in

1/74

The chartplotter marks the location of the turn with a

waypoint.

If necessary, repeat steps 4 and 5 to add more turns.

Select the final destination.

Viewing a List of Routes and Auto Guidance Paths

Select Info > User Data > Routes & Auto Guidance Paths.

If necessary, select Filter to see routes only or Auto

Guidance paths only.

Editing a Saved Route

You can change the name of a route or change the turns the

route contains.

Select Info > User Data > Routes & Auto Guidance Paths.

Select a route.

Select Review > Edit Route.

Select an option:

• To change the name, select Name, and enter the name.

• To select a waypoint from the turn list, select Edit Turns >

Use Turn List, and select a waypoint from the list.

• To select a turn using the chart, select Edit Turns > Use

Chart, and select a location on the chart.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

Select Info > User Data > Routes & Auto Guidance Paths.

Select a route.

Select Navigate To.

Select an option:

• To navigate the route from the starting point used when

the route was created, select Forward.

• To navigate the route from the destination point used

when the route was created, select Backward.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Browsing for and Navigating Parallel to a Saved

Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

Select Info > User Data > Routes & Auto Guidance Paths.

Select a route.

Select Navigate To.

Select Offset to navigate parallel to the route, offset from it

by a specific distance.

Indicate how to navigate the route:

• To navigate the route from the starting point used when

the route was created, to the left of the original route,

select Forward - Port.

• To navigate the route from the starting point used when

the route was created, to the right of the original route,

select Forward - Starboard.

• To navigate the route from the destination point used

when the route was created, to the left of the original

route, select Backward - Port.

• To navigate the route from the destination point used

when the route was created, to the right of the original

route, select Backward - Starboard.

If necessary, select Done.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Initiating a Search Pattern

You can initiate a search pattern to search an area. Different

patterns are better suited for different search situations.

Select Info > User Data > Routes & Auto Guidance Paths

> New > Route Using SAR Pattern.

Select a pattern:

• Select Sector Search when the location of the object is

fairly known, the search area is small, and an intensive

search is needed.

• Select Expanding Square when the location of the object

is somewhat doubtful, the search area is small, and an

intensive search is needed.

• Select Creeping/Parallel Line when the location of the

object is approximate, the search area is small, and a

consistent search is needed.

Enter the search parameters.

Select Done.

If necessary, select Engage.

Deleting a Saved Route

Select Info > User Data > Routes & Auto Guidance Paths.

Select a route.

Select Review > Delete.

Deleting All Saved Routes

Select Info > User Data > Delete User Data > Routes &

Auto Guidance Paths.

Auto Guidance

WARNING

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

All route and navigation lines displayed on the chartplotter are

only intended to provide general route guidance or to identify

proper channels, and are not intended to be precisely followed.

Always defer to the navaids and conditions on the water when

navigating to avoid groundings or hazards that could result in

vessel damage, personal injury, or death.

NOTE: Auto Guidance is available with premium charts, in some

areas.

You can use Auto Guidance to plot the best path to your

destination. Auto Guidance uses your chartplotter to scan chart

18 Navigation with a Chartplotter

How do I connect a non garmin camera to the Volvo Penta Glass cockpit (B-Series)? I would like to see and record my kids and they participate in watersports behind the boat as I drive. Submitted on 2-8-2023 at 21:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 in the language / languages: English as an attachment in your email.

The manual is 7,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 User Manual - Dutch - 82 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Manual

Product: