544109
7
Zoom out
Zoom in
Previous page
1/16
Next page
If you need to remove the battery, wait until the screen turns off
before removing the battery.
Turning the Device On and Off Using REC
You can use REC to turn the device on and off in recording
mode. This feature allows you to start recording quickly, while
automatically turning off the device to conserve battery power
when you are not recording.
NOTE: The device does not turn off using REC unless you use
REC to turn on the device.
1
With the device turned off, slide REC toward the lens.
The device turns on and starts recording video.
2
When you are finished recording, slide REC away from the
lens.
The device stops recording and turns off.
Modes
You can operate your device in several modes.
VIEWFINDER: Displays the camera viewfinder and status
information.
PLAYBACK: Allows you to view recorded videos and photos.
DASHBOARD: Displays sensor data in charts and data fields
(VIRB Elite only).
SETUP: Allows you to change camera settings.
Changing Modes
1
Select MODE to cycle through the available modes.
The modes cycle from left to right. The icon for the selected
mode appears larger, and the name of the selected mode
appears at the bottom of the screen.
2
Stop selecting MODE when the desired mode appears.
Viewfinder
You can use the viewfinder to set up shots, view status
information, and level the camera (VIRB Elite only).
Select MODE > VIEWFINDER.
À
Battery status
Á
Recording time remaining on the memory card
Â
Current video mode
Select to view the level (Leveling the Device).
Select to view the status page (Status Page).
Leveling the Device
NOTE: This feature is available for VIRB Elite only.
You can use the on-screen level when you mount the device to
ensure your videos and photos are perfectly level.
1
Select MODE > VIEWFINDER > .
The level appears.
2
Adjust the device until the degree of roll
À
and degree of
pitch
Á
are both 00°, and the brown section of the level
Â
is
even with the horizon line
Ã
.
Calibrating the Level
You can calibrate the level if it does not seem accurate. It may
be necessary to calibrate the level when using the device in
extreme temperatures.
1
Select MODE > VIEWFINDER > .
2
Place the device flat on a level surface, with the screen
facing up.
3
Select OK.
Status Page
The status page provides at-a-glance details about the current
settings of your device.
Select MODE > VIEWFINDER > .
À
Displays the video mode, field of view, elapsed time, interval or
loop setting (if set), number of stored videos, and time remaining on
the memory card.
Á
Displays the photo resolution, camera mode, timer count (if set),
photos remaining, and number of stored photos.
Â
Displays the sensors being used (VIRB Elite only) including Wi-Fi
®
,
cadence, heart rate, tempe, and GPS. The sensor icons are gray
when disabled, flashing when searching for a signal, and white
when enabled or connected.
Video
Recording a Video
NOTE: If the battery power becomes very low while recording
video, the device automatically stops recording, saves the
video, and safely turns off.
1
Slide REC toward the lens to start recording video.
If the device is off, it turns on automatically. The device starts
recording video, and the viewfinder appears.
Viewfinder 3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VIRB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VIRB in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VIRB

Garmin VIRB User Manual - German - 18 pages

Garmin VIRB Quick start guide - Dutch - 6 pages

Garmin VIRB User Manual - Dutch - 16 pages

Garmin VIRB User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info