629029
9
Zoom out
Zoom in
Previous page
1/16
Next page
4
For the best results, mount the device so it does not move
while recording.
5
Record a video.
Recording a Video Loop
Loop recording allows you to record video continuously but save
only the most recent video footage. You can select the number
of minutes of video to save. This enables you to save storage
space when you want to capture key moments but do not want
to save all footage of an activity. This feature is useful when
using the device as a driving recorder.
The saved video loop is split into multiple files of equal length.
This allows you to delete unwanted portions of the video easily.
1
Hold MENU
.
2
Select Video >
Loop
.
3
Select the number of minutes of video to save.
4
Start recording video.
5
When finished, stop recording.
The most recent footage is saved on the memory card, up to the
number of minutes selected in step 3.
Connecting a Cabled External Microphone or
Audio Source
Before you can connect an external microphone, you must
purchase the
VIRB rugged combo cable accessory. Go to
http://virb.garmin.com/products/rugged-combo-cable-virbx-xe.
You must also have an external microphone or audio source
with a 3.5 mm connector.
When you enable and connect an external microphone, the
device records audio from the external microphone instead of
the built-in microphone.
1
Hold MENU.
2
Select System
> Microphone > External
to enable the
external microphone.
3
Align the charger posts on the accessory cable with the
contacts on the side of the device, and press the accessory
cable until it clicks.
4
Connect the microphone to the MIC IN
connector on the
accessory cable.
To stop using the external microphone, you must disconnect the
accessory cable from the device. You can select
System >
Microphone >
Internal
to enable the built-in microphone.
Live Viewfinder
Outputting Composite Video
Before you can output composite video, you must purchase the
VIRB rugged combo cable accessory. Go to
http://virb.garmin.com/products/rugged-combo-cable-virbx-xe.
You must also have an RCA composite video cable.
You can display composite video on an external display.
1
Hold
MENU.
2
Select Video
> Video Out
to enable composite video output.
3
Align the charger posts on the accessory cable with the
contacts on the side of the device, and press the accessory
cable until it clicks.
4
Connect an RCA composite video cable to the VID OUT
connector of the accessory cable and to an available port on
your external display.
Photos
Taking a Photo
Your device provides several methods for taking a photo using
the default settings. You can change the photo mode to capture
single, burst, or time lapse photos by holding MENU and
selecting
Photos
> Mode
.
While on the home screen or sensor screens, select the
key to take a single photo.
While on the home screen or sensor screens, hold the key
to take multiple photos in burst-on-demand mode.
The device continues taking photos the entire time you hold
.
While recording a video, select the key to capture a photo
at the same resolution as the video recording.
Photos taken while recording a video always use single photo
capture. Photo timelapse or burst settings are ignored while
recording video.
Photo Settings
Hold
MENU, and select Photos.
Mode: Sets the shooting mode
(
Photo Modes
, page
5).
NOTE:
Additional settings vary based on the selected mode.
Start Time: Sets the start time for extended time-lapse mode.
You can start shooting now, or set a custom start time.
Duration: Sets the duration for extended time-lapse mode. You
can shoot continuously, or set a custom duration.
Interval: Sets the time interval for burst mode, time-lapse mode,
and extended time-lapse mode. For time-lapse mode, you
can choose a preset interval or set a custom interval.
Field of View: Sets the zoom level.
Self Timer: Sets the timer to delay taking a photo.
Lens Correct: Corrects wide-angle barrel distortion and reduces
the field of view.
Date Stamp: Adds a date stamp to your photo.
Photo Modes
Hold MENU, and select Photos
> Mode
.
Single: Enables you to take a single photo using automatic
exposure.
Burst: Enables you to rapidly take three, five, or ten images in
one second. This mode is ideal for capturing photos of
people or objects in motion.
NOTE:
The
VIRB
XE device provides additional burst
intervals.
Timelapse: Enables you to capture a series of photos at set
time intervals.
Ext. Timelapse: Enables you to capture a series of photos over
an extended duration. The VIRB
X/XE device turns off
between image captures, allowing the device to maximize
battery life.
Taking a Delayed Photo
You can delay taking a photo using the self timer. This allows
you to join or adjust a shot before the photo is taken.
1
Hold .
2
Select Photos > Self Timer.
3
Select a delay time.
4
While on the home screen, select the key.
The countdown timer displays the remaining time until the
photo is taken, in seconds.
Photos 5
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VIRB X Actioncam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VIRB X Actioncam in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VIRB X Actioncam

Garmin VIRB X Actioncam User Manual - German - 16 pages

Garmin VIRB X Actioncam User Manual - Dutch - 16 pages

Garmin VIRB X Actioncam User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info