691459

Garmin VHF 315 serie Manual

12
Zoom out
Zoom in
Previous page
1/18
Next page
2
Enter the MMSI number (Entering Text, page 4).
3
Enter a name (optional).
4
Select ACCEPT.
Editing an Entry in the Directory
1
Select DSC > DIRECTORY > EDIT ENTRY.
2
Select an entry.
3
Edit the MMSI number, the name, or both (Entering Text,
page 4).
4
Select ACCEPT.
Deleting an Entry from the Directory
1
Select DSC > DIRECTORY > DELETE.
2
Select an entry.
3
Select YES.
Adding a Group
A DSC group is a collection of specific vessels, such as a sailing
club or flotilla, that share a single group MMSI number.
1
Select DSC > GROUP > ADD ENTRY.
2
Enter the group MMSI number (Entering Text, page 4).
3
Enter a name for the group (optional).
4
Select ACCEPT.
Editing a Group
1
Select DSC > GROUP > EDIT ENTRY.
2
Select a group.
3
Edit the group MMSI number, the name, or both (Entering
Text, page 4).
4
Select ACCEPT.
Deleting a Group
1
Select DSC > GROUP > DELETE.
2
Select a group.
3
Select YES.
DSC Settings
Manual Position Information
If you do not have a GPS device connected to your radio, you
can manually enter your position and time of entry. The position
data is transmitted with DSC calls. When you enter the position
and time manually, MANUAL POS appears on the screen.
Manually entered position information must be updated
regularly, and the radio displays two alerts to remind you to
update the position data.
• When the position data you entered manually is more than
four hours old, DATA IS OVER 4 HOURS OLD appears on
the screen. The radio continues to transmit this position data,
but you should update it before it becomes invalid.
• When the position data you entered manually is more than
23.5 hours old, it is considered invalid and DATA IS INVALID
appears on the screen. The radio does not transmit invalid
position data, and you should update it immediately.
Entering Position Information Manually
1
Select MENU > SYSTEM > MANUAL GPS.
2
Enter your current coordinates and the present time (Entering
Text, page 4).
3
Select ACCEPT.
Changing the Channel to 16 Automatically
By default, the radio changes to channel 16 automatically when
receiving distress, distress relay, and all-ships urgency calls. In
certain situations, when you must continually monitor a channel
to maintain uninterrupted communication with another vessel,
for example, you can disable this feature.
1
Select MENU > DSC > AUTO CHANGE CH..
2
Select an option:
• To set the radio to switch automatically to channel 16
when you receive a qualifying call, select ON.
• To set the radio to prompt you to accept or decline a
channel change when you receive a qualifying call, select
OFF.
Sending Automatic Replies
You can configure the radio to automatically respond to
incoming calls, including position requests.
NOTE: When you configure the radio to automatically respond
to incoming calls, the radio also changes the channel
automatically for all incoming individual calls.
1
Select MENU > DSC > INDIV REPLY.
2
Select an option:
• To send automatic replies, select AUTO.
• To send replies manually, select MANUAL.
Automatic Transmitter Identification
System
Automatic Transmitter Identification System (ATIS) is a vessel
identification system used on certain inland waterways in some
European countries. See your Garmin dealer to program your
VHF radio if you plan to use your radio on waterways that are
within the bounds of the Regional Arrangement Concerning the
Radiotelephone Service on Inland Waterways (the Basel
Agreement). ATIS is prohibited outside the European inland
waterways that are covered by the Basel Agreement.
When you enable ATIS, your radio sends a data signal
identifying your station at the end of every transmission. Data
identifying your position is not sent, but your position is
calculated through the method of triangulation by coastal
stations that receive your transmissions.
To enable ATIS, you must enter your ATIS identification number
(Entering Your ATIS Identification Number, page 8), and turn
on ATIS (Turning On and Off ATIS, page 9). See your Garmin
dealer to determine your ATIS identification number and to learn
about ATIS requirements for your region.
Your radio disables these functions when you enable ATIS.
• Digital Selective Calling (DSC)
• Monitor two or three channels (Dual watch and Tri watch)
• Scanning channels
International channels 6, 8, 10, 11, 12, 13, 14, 71, 72, 74, and
77 restrict transmitting to low-power (1 W) when you enable
ATIS.
Entering Your ATIS Identification Number
NOTICE
You can enter your ATIS identification number only once. If you
must change your ATIS identification number after entering it,
you must take your radio to your Garmin dealer for
reprogramming.
NOTE: You can access the ATIS settings on the radio after the
ATIS feature is activated by your Garmin dealer.
1
Select MENU > ATIS > MY ATIS ID.
2
Enter your ATIS number (Entering Text, page 4).
3
Select ACCEPT.
The radio prompts you to reenter your number.
4
Enter your ATIS number again, and select ACCEPT.
If the ATIS numbers do not match, a message appears.
5
If necessary, select RETRY, and enter the number again.
8 Automatic Transmitter Identification System
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VHF 315 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VHF 315 serie in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VHF 315 serie

Garmin VHF 315 serie User Manual - German - 18 pages

Garmin VHF 315 serie User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info