501981
7
Zoom out
Zoom in
Previous page
1/10
Next page
VHF 100/200 Series Radio Installation Instructions 7
4. Add additional T-connectors for each device you want to add to the NMEA 2000 network, and connect each device to a T-connector with
a drop cable.
5. Connect terminators (not included) to each end of the combined T-connectors.
+
-
Drop cable
Male
terminator
Female
terminator
Power cable
Ignition or in-line
switch
Fuse
NMEA 2000
device
T-connectors
12 Vdc battery
Creating a Basic NMEA 2000 Network
NMEA 2000 PGN information
Use this table to determine the approved NMEA 2000 PGN information that can be received and transmitted by a VHF 200 series radio
when communicating with a NMEA 2000-compliant device.
Receive Transmit
059392 ISOAcknowledgment 059392 ISOAcknowledgment
059904 ISORequest 060928 ISOAddressClaim
060928 ISOAddressClaim 126208 NMEARequest/Command/
Acknowledge Group Function
126208 NMEA-Command/Request/AcknowledgeGroupFunction
129026 COG(courseoverground)andSOG(speedoverground)
- Rapid Update
126464 PGN List
126996 ProductInformation
129029 GNSS (Global Navigation Satellite System) Position Data 129799 RadioFrequency/Mode/Power
129808 DSCCallInformation
Garmin VHF 200 Series radios are NMEA 2000 certied.
Connecting the VHF 200 Series Radio to a Hailer Horn (Optional)
The radio can be connected to a hailer horn that will allow using the microphone or the GHS 10 handset to make announcements through
your public address system.
To mount the hailer horn, refer to the installation instructions that came with the device. Mount the hailer horn at least 10 ft. (3 m) away
from the microphone and facing away from the microphone to avoid feedback.
To connect the VHF 200 series radio to a hailer horn:
1. Attach the included 23 in. (600 mm) hailer cable to the cable on the rear panel of the radio by connecting the red RCA plug into the red
jack.
2. Connect the white wire on the other end of the hailer cable to the positive (+) connection on the hailer.
3. Connect the black wire to the negative (-) connection on the hailer.
CAUTION: Cover the connections with a waterproof, adhesive tape, such as rubber vulcanizing tape, to prevent water from
seeping into the radio.
Refer to the VHF 100/200 Series Owners Manual to operate the hailer.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VHF 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VHF 100 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VHF 100

Garmin VHF 100 User Manual - English - 60 pages

Garmin VHF 100 Installation Guide - German - 10 pages

Garmin VHF 100 User Manual - German - 60 pages

Garmin VHF 100 Installation Guide - Dutch - 10 pages

Garmin VHF 100 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info