589620
11
Zoom out
Zoom in
Previous page
1/14
Next page
Balance - 10s Avg.: The 10-second moving average of the left/
right power balance.
Balance - 30s Avg.: The 30-second moving average of the left/
right power balance.
Balance - 3s Avg.: The three-second moving average of the
left/right power balance.
Balance - Avg.: The average left/right power balance for the
current activity.
Balance - Lap: The average left/right power balance for the
current lap.
Cadence: The number of revolutions of the crank arm or
number of strides per minute. Your device must be
connected to a cadence accessory for this data to appear.
Cadence - Avg.: The average cadence for the current activity.
Cadence - Lap: The average cadence for the current lap.
Pedal Smoothness: The measurement of how evenly a rider is
applying force to the pedals throughout each pedal stroke.
Power: The current power output in watts.
Power - %FTP: The current power output as a percentage of
functional threshold power.
Power - 10s Avg.: The 10-second moving average of power
output.
Power - 30s Avg.: The 30-second moving average of power
output.
Power - 3s Avg.: The three-second moving average of power
output.
Power - Avg.: The average power output for the current activity.
Power - IF: The Intensity Factor for the current activity.
Power - kJ: The accumulated work performed (power output) in
kilojoules.
Power - Lap: The average power output for the current lap.
Power - Lap Max.: The top power output for the current lap.
Power - Last Lap: The average power output for the last
completed lap.
Power - Max.: The top power output for the current activity.
Power - NP: The Normalized Power for the current activity.
Power - NP Lap: The average Normalized Power for the
current lap.
Power - NP Last Lap: The average Normalized Power for the
last completed lap.
Power - TSS: The Training Stress Score for the current
activity.
Power - watts/kg: The amount of power output in watts per
kilogram.
Power Zone: The current range of power output (1 to 7) based
on your FTP or custom settings.
Torque Effectiveness: The measurement of how efficiently a
rider is pedaling.
Troubleshooting
Updating the Software Using Vector Updater
Before you can run the Vector Updater application, you must
have a USB ANT Stick (included), an internet connection, and
the pedal pods must have functioning batteries installed.
1Go to www.garmin.com/vectorowner, and download the
Vector Updater application.
2Bring Vector within range (3 m) of your computer.
3Open the Vector Updater application, and follow the on-
screen instructions.
Tips for Using Vector Updater
If Vector Updater is not functioning properly, you can try these
tips.
Insert the USB ANT Stick directly into a USB port on your
computer. USB hubs are not recommended.
If you are also running the ANT Agent application on your
computer, you can either insert another USB ANT Stick or
close the ANT Agent application.
If Vector Updater cannot find your device after more than two
minutes, remove the batteries from each pedal pod, wait 20
seconds, and replace the batteries.
If Vector Updater still cannot find your device, you should
install new batteries into each pedal pod.
Performing a Static Torque Test
NOTICE
The static torque test is intended for advanced cyclists and
installation experts. This test is not required under normal
circumstances to achieve good results with the Vector system.
This test is available for the Edge 1000, 810, and 510 devices.
Garmin recommends performing the static torque test a
minimum of three times and averaging the reported torque
values.
Go to www.garmin.com/vectorowner, and click on the FAQs
link for detailed instructions.
Following repeated static torque tests, if the reported torque
value is consistently different than the expected value, you can
enter a scale factor for one or both pedals. The scale factor is
stored in the pedal and adjusts the power value that is
calculated on the pedal. The scale factor is sent to the Edge
device and stored on Edge device.
Upgrading Vector S to a Dual Sensor System
You can upgrade your Vector S system to a dual sensor
system.
1Go to http://buy.garmin.com, or contact your Garmin dealer
to purchase the upgrade pedal.
2Remove the existing right pedal.
3Determine the bicycle chain clearance (Determining the
Bicycle Chain Clearance).
4Install the Vector components for the right pedal and pedal
pod (Installing the Pedal Pod and Pedal).
5Pair the Vector system with your Edge device (Paring Vector
with Your Edge 1000).
6Follow the setup and calibrations instructions for your device
(Your First Ride).
7Check for software updates (Updating the Software Using
Vector Updater).
Third-Party Devices
For a list of devices that are compatible with Vector, go to
www.garmin.com/vectorowner.
Appendix 7
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Vector S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Vector S in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Vector S

Garmin Vector S Quick start guide - English - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info