691272

Garmin Vector 3 Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
19
Use a 4 mm hex key to gently tighten the battery cover.
NOTE: Do not over-tighten the battery cover. The cover is sufficiently tight when the O-ring gasket is no longer visible.
The pedal LED flashes red once.
20
Install the pedals (Installing the Pedals, page 1).
Vector Storage
If you are transporting your bicycle or not using Vector for an
extended period of time, Garmin recommends removing Vector
and storing it in the product box.
Other Compatible Devices
Edge 1000 Instructions
Pairing Vector with the Edge 1000
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Turn on the Edge device.
3
From the home screen, select > Sensors > Add Sensor >
Power.
4
Rotate the crank arm a few times.
5
Select your sensor.
When the sensor is paired with your Edge device, a message
appears, and the sensor status is Connected. You can
customize a data field to display Vector data.
Entering the Crank Length with the Edge 1000
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector.
2
From the home screen, select > Sensors > > Sensor
Details > Crank Length.
3
Enter the crank length, and select .
Edge 520 and Edge 820 Instructions
Pairing Vector with the Edge 520 and Edge 820
This procedure contains instructions for the Edge 520 and Edge
820. For more information about compatible devices, go to
www.garmin.com/manuals/vector3.
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Select or Menu.
3
Select Settings > Sensors > Add Sensor > Power.
4
Rotate the crank arm.
5
Select your sensor.
6
Select Add.
When the sensor is paired with your device, is solid. You
can customize a data field to display power data.
Entering the Crank Length with the Edge 520 and
Edge 820
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector.
2
Select or Menu.
3
Select Settings > Sensors > Power.
4
Select your sensor.
5
Select Sensor Details > Crank Length.
6
Enter the crank length, and select .
Forerunner
®
935 and fēnix
®
5 Series
Instructions
Pairing Vector with Your Forerunner 935 and fēnix 5
Series
This procedure contains instructions for the Forerunner 935 and
fēnix 5 Series watches. For more information about compatible
watches, go to www.garmin.com/manuals/vector3.
1
Bring your compatible watch within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Hold or MENU.
3
Select Settings > Sensors & Accessories > Add New >
Power.
4
Rotate the crank arm.
5
Select your sensor.
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Entering the Crank Length with the Forerunner 935
and fēnix 5 Series
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector.
2
Hold or MENU.
3
Select Settings > Sensors & Accessories > Power.
4
Select your sensor.
5
Select Crank Length.
6
Enter the crank length, and select .
Appendix
Registering Your Vector System
Help us better support you by completing our online registration
today.
• Go to the Garmin Connect Mobile app.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Upgrading Your Vector 3S to a Dual Sensing
System
Before you install the new right pedal, the left pedal must be
paired and connected to a compatible Edge device or the
Garmin Connect Mobile app.
1
Review the Vector installation instructions (Installing the
Vector Components, page 1).
2
Remove the existing right pedal.
3
Install the new right pedal (Installing the Pedals, page 1).
4
Rotate the crank arm.
5
Select an option to connect the right pedal to the left pedal:
• From your compatible Edge device, select > Sensors,
select your sensor, select Sensor Details > Pair Right
Power Sensor, and enter the sensor ID found on the
pedal.
• From the Garmin Connect Mobile app device settings,
enable the Right Pedal, and enter the sensor ID found on
the pedal.
6 Other Compatible Devices
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Vector 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Vector 3 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Vector 3

Garmin Vector 3 User Manual - German - 16 pages

Garmin Vector 3 User Manual - Dutch - 14 pages

Garmin Vector 3 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info