691281

Garmin Varia Rearview Radar RTL 510 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
Varia RDU Device Overview
À
Device key Turns the device on and off.
Á
Ambient light sensor Detects available light and automatically
adjusts the brightness of the display.
Â
Connection status
LED
Appears solid blue when the device is paired
with the taillight. Flashes blue when the
device is searching for the taillight.
Ã
FRONT and REAR
device status LEDs
Flashes red when the battery is low.
Appears solid red when there is a device
error.
Ä
Threat level LED
Charging status LED
(Charging the Device,
page 4)
Changes color based on the potential level
of threat. Green indicates no vehicle is
detected. Amber indicates a vehicle is
approaching. Red indicates a vehicle is
advancing at a high rate of speed.
Å
Vehicle position LEDs Moves up the column as the vehicle gets
closer to your bike.
Installing the Varia RDU Device
NOTE: If you do not have a Varia RDU device, you can skip this
task and use a compatible Edge device (Pairing the Taillight with
Your Edge 1030, page 2).
You can install the device on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Turning On the
Varia RDU Device
Hold the device key for 1 second to turn on the device.
The LEDs fill the column to indicate the battery level.
The LED flashes blue while it is searching for the taillight.
Varia RDU Battery Status LED
When you turn on the device, the LED at the top of the column
briefly indicates the battery status.
LED Activity Status
Flashing green The device is charging.
Solid green Charging is complete.
Flashing yellow The battery is low.
Flashing red The battery is critically low.
Setting the Varia RDU Device Tones
• Press the device key to turn on tones.
• Press the device key again to turn off tones.
Turning Off the Varia RDU Device and Taillight
If the Varia RDU is paired with the taillight, you can turn off both
devices at the same time.
Hold the device key on the Varia RDU device for 1 second.
The Varia Taillight and Your Edge
1030
You can remotely control your taillight and customize settings
using your compatible Edge device. This section contains
instructions for the Edge 1030 device. Other compatible Edge
devices contain similar settings and controls (Other Compatible
Devices, page 4).
Pairing the Taillight with Your Edge 1030
The first time you connect the taillight to your Edge device, you
must pair the device and taillight. After the initial pairing, the
device automatically connects to the taillight when you start your
activity and the taillight is active and within range.
NOTE: The taillight is compatible with other Garmin devices
(Other Compatible Devices, page 4).
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+
®
sensors while
pairing.
2
Turn on the Edge device.
3
Select > Sensors > Add Sensor > Search All.
4
While the Varia device is turned off, hold the device key for 2
seconds to enter pairing mode.
The status LED flashes purple, and the taillight turns on. The
device is in pairing mode for 5 minutes or until you press the
device key.
5
Select your sensor, and select Add.
When the sensor is paired with your Edge device, the sensor
status is Connected. The (radar) and (bike light) status
icons appear solid on the top banner of the home screen.
2 The Varia Taillight and Your Edge 1030
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Varia Rearview Radar RTL 510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Varia Rearview Radar RTL 510 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Varia Rearview Radar RTL 510

Garmin Varia Rearview Radar RTL 510 User Manual - German - 12 pages

Garmin Varia Rearview Radar RTL 510 User Manual - Dutch - 12 pages

Garmin Varia Rearview Radar RTL 510 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info