583791
6
Zoom out
Zoom in
Previous page
1/36
Next page
3
4
This section of this manual provides you with information of the TR-1 Gladiator autopilots’ capabilities.
We have made every effort to minimize the pain in getting you up to speed as a user of the TR-1, however,
programmable devices such as your TR-1, are often difcult to learn to use and to program. We recommend
that you do not take your shing tackle on your rst trip with your new autopilot. Take a few hours on a nice
day to get your system setup and familiarize yourself with its operation, then your rst shing trip with the unit
will really have you smiling.
This manual is laid out in sections that are, as best we can make them, self contained. We start with the features
and functions available and fundamentals of how the system works, then how to operate the basic functions, and
nally how to get into the ne adjustments.
The TR-1 is a heading hold autopilot. It steers to maintain a constant magnetic heading. The autopilot
measures magnetic heading with a uxgate compass and receives rate of turn information from an angular rate
sensor (gyroscope). The autopilot computer forms a rudder rate command from a combination of the compass,
gyro, and engine tachometer signals. This rudder rate command is calculated and sent to the pump controller in
the electrohydraulic unit electronics 20 times each second. The pump controller servos the pumping speed and
direction to match the rudder rate command from the autopilot.
Beyond the basic heading hold function, the autopilot provides for several other modes of automatic and
manually controlled steering functions. These are listed below.
1. Rudder. Rudder steering is used for electrically steering without feedback from the gyro or compass. The
rudder moves while a turn button is held down, and stays in place when the button is let up. (Steering the boat
with the handheld without heading hold.)
2. Rudder command / Attitude hold (RCAH). (Steering the boat with the Handheld while in Autopilot)
RCAH is the primary means for changing the boats’ heading with the remote.
3. Man Overboard. See page10. The autopilot will execute a turn to the reciprocal course and pass near the
maneuver initiation point.
4. Zigzags. See page 11. The autopilot will steer a zigzag course with preset amplitude and period. Factory
Default is set an amplitude (turn) of 30 degrees, and the period (length) set at 1.5 minutes.
5. Step turns. See page 12. The autopilot will execute predetermined xed angle turns in this mode. (Factory
Default is 15 degree turns)
6. Circles. See page 13. The autopilot will turn in continuous circles of preset lap time. (Factory Default is set
at a 5 minute circle.)
7. U-Turns. See page 14. The autopilot will execute a U-Turn by using the right or left chevron buttons on the
handheld
Introduction to Operation and Adjustments
System Functions and Features
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin TR-1 Gladiator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin TR-1 Gladiator in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info